Specifications

To lock the drive, push the bracket with the

drive back installed back into the slot unl

the bracket is re-engaged.

Figure 3A Figure 3B

3.2 Ulizing the external 3.5 inch bay

Your case is equipped with an addional

3-fold HDD cage, which is mounted on the

secondary mounng bracket at the case

boom. This rail can be shied or removed

at any me if necessary. To do so, please

unscrew the four screws which are holding

the rail. You can then move rail and cage to

a dierent posion on the case boom.

3.1 Mounng of hard disk drives

Install the hard drives in the illustrated mounng frames. In order to extract the frame, squee-

ze the protruding brackets and pull the slide out gently.

To install a hard drive into a bracket insert the disk so that the connectors point to the back and

aach the hard drive using the screws provided.

For the installaon of 3.5 inch drives, use the holes in Figure 3A.

For the installaon of 2.5 inch drives, use the holes in Figure 3B.