Specifications

EN
Venlaon System:
The Nanoxia Deep Silence 1 Rev. B has an integrated venlaon system consisng three Deep
Silence fans and a built-in 2-channel fan controller. A total of up to seven fans can be mounted.
The Deep Silence axial ow fans have been specically opmized for very quiet operaon. The
range of fan speeds and controls was designed to enable each user to adjust the case venlaon
to their own needs.
All air intake openings (front, boom, le side panel) are readily accessible and have easy to
clean dust lters. Behind the lower front door you can nd two „Easy Access“ fan trays, allowing
an easy access to both the dust lter and the front 120 mm fan(s).
The unique Nanoxia Air Chimney makes it easy to adapt the case to your needs. Under extreme
condions you can counteract heat generaon under the top cover by simply opening the
Chimney to allow the heat to escape.
You can also, with the Chimney open, mount addional case fans or a water radiator below the
cover. In this case, both the fan and the case interior are opmally protected against dust and
spills. A circumferenal groove in the contact surface of the Air Chimney serves as addional
Fans:
Front: 2 x 120 mm Nanoxia Deep Silence fan (max. 1,300 rpm)
Rear: 1 x 140 mm Nanoxia Deep Silence fan (max. 1,100 rpm)
Oponal Equipment:
Side panel: 1 x 140/120 mm fan
Case boom: 1 x 120/140 mm fan (demounng of the secondary HDD-cage
mounng rail required)
Case top: 2 x 120/140 mm fan (open Air Chimney advised)
Watercooling-ready
Nanoxia Deep Silence 1 Rev. B is opmally designed for the use of water cooling systems. Thus,
120 or 240 mm radiators or compact water cooling soluons can be accommodated both behind
the front and under the top cover.
Top cover: 120/240 mm radiator
The case cover oers specially designed, lateral fastening points, which allow the installaon of a
03