Specifications
EN
5.1 Fans in the case front
To switch the fans in the front or to clean the dust lters, rst open the lower front door. Next,
open the “Easy Access Panel” by pushing slightly on the le side of the panel. (Fig. 5A).
You can remove the fan by pushing away the retaining lugs a lile bit from the fan and then
pull the fan out. (Fig. 5B).
The dust lters can easily be pulled out. (Fig. 5C).
Please note, that the lter elements must be fully inserted to guarantee the proper operaon
of the “Easy Access Panel”.
5.2 Fans under the top cover
If you want to install more
fans at the top of the case,
please remove the plasc
cover rst (see chapter 4.2).
Then hold the fan from the
inside and secure it to the top
by fastening the screws from
the outside.
Case fans installed at the top of the case should exhaust air out of the case (fan rear side
facing outwards). Please note to keep the Air Chimney opened when you have mounted fans
under the top.
Fig. 5A
Fig. 5B
Fig. 5C
140 mm / 120 mm
11