Specifications

3.4 Ulizing the 6 x 2.5 inch mounng frame

Our newly developed 6 x 2.5 inch frame allows the space-saving mounng of up to six 2.5 inch

drives. For installaon, the mounng frame will need three 3.5 inch bays.

To mount the hard disks, please remove the mounng frame. Insert your 2.5 inch drives ver-

cally in the frame and secure them on both sides with the 2.5 inch mounng screws (long).

Then push the frame with the hard drives into the HDD cage in the posion you prefer.

If you plan to put the frame in the addional 3-bay HDD-cage, we recommend connecng the

SATA power and data cables, before pushing the mounng frame back into the cage and then

guide the cables through the appropriate cable guides in the motherboard tray.

We recommend using SATA data and power cables with straight connectors.

If you do not want to use this unique feature, suciently 3.5 inch mounng carriages are

included to install up to 13 hard disks.