Instructions / Assembly

1525 South Gladiola Street, Suite 8, Salt Lake City, UT 84104 • www.GetNewLook.com

• Allow surface to dry. Clean off any excess and test with a white rage as discussed above.

• Polish with 400-grit resin.

• Apply additional NanoSet Color as recommended to achieve more vibrancy and intensity.

• Polish with 800-grit resin and/or apply NanoSet Protector as needed or recommended.

PRODUCT LIMITATIONS

• NanoSet Color incorporates UV blockers. However, dyes are generally less UV resistant than color pigment solutions. This product is

mostly intended for interior surfaces and it is recommended to always use a sealer with UV blockers if NanoSet Color is installed outdoors.

• Use NanoSet Cleaner Concentrate for increased protection and color integrity.

• Do not over-apply NanoSet Color. Once the surface stops absorbing product, stop applying the color. Dry, powdery residue will result with

over-application and must be properly cleaned.

• Do no apply product to surfaces below 40°F. Best results are achieved when the surface can stay at appropriate temperatures during

application and drying, approximately 4 hours.

• Protect the surface against airflow, wind or rain during application.

• Clean all sprayers with water or acetone immediately after use, then flush with clean water.

• Water-based dyes may bleed. Care must be taken when using taper or stencils.

• Again, dry-times will vary based on carrier used, surface, temperature and humidity. Dry time may reach up to 45-60 minutes when diluted

with water. Dry time is less when the product is diluted with acetone-water blends.

• Do not dilute straight into acetone to avoid shocking the NanoSet Color dye concentrate.

• Use NanoSet Cleaner as your regular maintenance cleaner as it contains active ingredients to help preserve your floor.

CONSUMER ADVICE

Contractors are independently owned and operated without affiliation to NewLook International, Inc. Choose a licensed and qualified contractor who

provides written information and example projects you can see before you buy. Contact your local ready mix or building material supplier or visit

http://www.GetNeLook.com.

PRODUCT & PACKAGING

Product

Container Size

Approximate Coverage

NanoSet Color™ Dye Concentrate

8 oz

Dilutes to approximately 1 gallon & covers approx. 500 – 700 sq. ft.

NanoSet Color™ Dye Concentrate

32 oz

Dilutes to approximately 4-5 gallons & covers approx. 2500 – 3000 sq. ft.

NanoSet Color™ Dye Concentrate

1 Gallon

Dilutes to approximately 16-20 gallon & covers approx. 10,000 – 12,000 sq. ft.

LIMITED PRODUCT WARRANTY

The manufacturer warrants that this product shall be of merchantable quality and within manufacturer’s tolerances when used or applied in

accordance with the manufacturer’s instructions. This product is not warranted as suitable for any purpose other than the general purpose for which

it is intended. This warranty runs for one (1) year from the date the product is purchased. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LMITED TO THE DURATION OF THIS WARRANTY. Liability under this

warranty is limited to replacement of defective product or, at the manufacturer’s option, refund of the purchase price. CONSEQUENTIAL AND

INCIDENTAL DAMAGES ARE NOT RECOVERABLE UNDER THIS WARRANTY.