Nanoleaf Essentials Bulbs & Lightstrips | User Manual
Contents 4 Product Setup 5 Installing the Bulbs 6 Installing the Lightstrips 8 Product Pairing 9 Pairing to the App for iOS 10 Pairing to the App for Android 13 Product Control 17 Problems & Solutions 18 Reset Options Additional Resources WARRANTY ONLINE MANUAL Product Catalog Nanoleaf Shapes – Triangles 2
Welcome to Smarter Living Congratulations on becoming an official owner of the Nanoleaf Essentials. Setting up your Nanoleaf Essentials Bulbs and Lightstrips Product Catalog is quick and easy,Shapes so you–can enjoy a next Nanoleaf Triangles level smart lighting experience in no time.
Product Setup
Product Setup Installing the Essentials Bulbs 1 Install Your Bulb To install your Nanoleaf Essentials Bulb, simply screw it into any compatible light socket. There are no hubs required to use Nanoleaf Essentials products, so once they’re installed you’re ready to pair. Watch On 2 Pair Your Bulb For full customization and access to all the Essentials features, pair your lights to your devices through the Nanoleaf App. For full pairing instructions, skip to page.8.
Product Setup Installing the Essentials Lightstrips 1 Plan Your Setup When you’re planning where to install lightstrips, make sure to place the Controller in an easily accessible area. Additionally, if you choose to hide the Controller, pair your lightstrip with your device before installing it, as you’ll need to access the back of the Controller during the pairing process if pairing with NFC. Watch On NOTE: Each Controller can power up to 10M of the strip at full brightness.
2 Prepare Your Surface Cutting a Lightstrip? The lightstrips should only be installed indoors and If your lightstrip needs to be shortened, on a flat surface. Clean your surface to be free of make sure the male end of the strip is dust and moisture. Tape is NOT recommended for already connected to the Controller (3.1). textured, porous, popcorn and ceiling surfaces (ie. Once connected, cut your strip from the wallpaper or brick walls). other end (female side).
Product Pairing
Product Pairing Pairing to the Nanoleaf App for iOS iOS Standard Pairing Process To ensure a smooth pairing process, please make sure you have the following things ready. 1 Nanoleaf Device Phone or Tablet Bluetooth Pairing Codes Bulb or Lightstrip Requires iOS 10+ Make sure that it is Found on the Welcome Card ON and ready to go! of back of the Controller Download & Open the Nanoleaf App The Nanoleaf Smarter Series App can be found in the Apple Store. 2 Pair Your Essentials 2.1.
iOS Additional Pairing Methods OPTION A: Pair with Manual Input 1. Select I Don’t Have a Code or Can’t Scan 2. Enter the 8-digit pairing code (can be found on the welcome card or Controller). “How can one setup be controlled by multiple iOS users?” This will require the Apple Home App and the Nanoleaf App. OPTION B: Pair with your Google Seamless Setup 1 Primary User 1. Open the Google Home app. 2. At the top left, tap + > Set up device > Set up new devices. 3.
Product Pairing Pairing to the Nanoleaf App for Android Android Standard Pairing Process To ensure a smooth pairing process, please make sure you have the following things ready. 1 Nanoleaf Device Phone or Tablet Bluetooth & Location Settings Pairing Codes Bulb or Lightstrip Requires Android 5.
Android Additional Pairing Methods OPTION A: Pair with Manual Input (Coming Soon) 1. Coming Soon: If you have more than one lightstrip connected to your network, select the magnifying glass to identify the correct lightstrip (it will flash green). 2. Once identified, TAP TO PAIR. 3. Enter your 8-digit pairing code (found on the welcome card or Controller). OPTION B: Pair with your Google Seamless Setup 1. Open the Google Home app. 2. At the top left, tap + > Set up device > Set up new devices. 3.
Product Control
Product Control Controller (Lightstrips Only) Controlling the Essentials (1/3) The Controller is the brain of the Nanoleaf Essentials Lightstrip. The touch control buttons on the Controller provide convenient shortcuts to common commands. The Controller can also be attached to any available linker slot in your layout. Power ON/OFF Cycle Colors Single Press Single Press Cycles through pre-loaded scenes. The Controller automatically comes with AND 7 default scenes.
Product Control Nanoleaf App Controlling the Essentials (2/3) Control your rooms and devices. Choose an existing color and Scene or create your own. Dashboard Discover Control your rooms or devices. Choose an Find and download new Scenes created by existing color and Scene or create your own. the Nanoleaf community. Explore Schedules (Coming Soon) Find helpful information about our products Automate your lights to turn on or off. including tutorials, new device features, etc.
Product Control Controlling the Essentials (3/3) Product Control Nanoleaf Essentials - User Manual Have you Met Thread? If you have a compatible Thread border router (like the Apple HomePod mini), your Essentials product will automatically begin using Thread with no additional steps required. Find out more on how you can level up your smart home experience here (https://youtu.be/JLbuT4rYW7Q?t=1).
Problems & Solutions
Problems & Solutions Reset Options A Power Cycle Power cycle your lights by unplugging them from power and then plugging them back in. B Toggle Your Bluetooth Try toggling your Bluetooth off and back on. No luck? Try restarting the app you’re using to control your lights, or restarting your entire device. C Check Your Switch Make sure that your lights weren’t turned off by a physical switch such as a power bar. If this is the case, this would make them powered down and unresponsive.
Let’s Get Social 19
