Full Product Manual

The following recommendations can help your Nanoleaf Aurora achieve the best wireless range &
network reception.
Best Locations for Nanoleaf Aurora:
▪ Place your Aurora in an open area where there are few obstructions, such as large pieces of
furniture or walls. Place it away from metallic surfaces.
▪ Avoid placing your Aurora behind furniture or inside cabinets.
▪ Don‘t place your Aurora in areas surrounded by metal surfaces on three or more sides. This can
cause signal issues.
▪ Try to place your Aurora at least 25 feet (8 meters) away from any microwave oven, 2.4 GHz
cordless phone, Wi devices, or other source of interference.
▪ Place your Aurora as close to your Wi home router as possible. For best performance, keep
the distance below 65 feet (20 meters) and have no more than one wall in between.
PROBLEMS & SOLUTIONS
Wi-Fi Troubleshooting
1. Wi Status Indicator. After the 1 minute bootup, the Wi Status indicator will show wi status.
a. Solid: Your Aurora is ready to be connected to your home network.
b. Flashing (1s interval): Wi conguration has timed out. Power cycle or hold the on button
and animation select button together for 5 seconds.
c. Unlit: Wi is congured and connected to your router.
d. Flashing (4s interval): Wi is congured, but the Aurora cannot connect to the target
network. It will continue trying unless you reset the Wi by holding the on button and
animation select button together for 5 seconds.
TIPS &
TROUBLESHOOTING