Full Product Manual
HARDWARE SET-UP
To connect the panels together, insert a linker into the linker port on
the reverse of the Aurora panels. Ensure that the metal contacts are
aligned, and gently snap the panels together.
Slow down tiger! Before you stick the panels onto the wall, be sure to plug it in and try
it out on a table rst.
Recommended Installation Requirements
This device should only be installed in an indoor environment on a at surface that can withstand the weight of the panels. Make sure that the
surface is dry and clean from any dust or oil. For optimal performance it is recommended that Nanoleaf Aurora be installed in a location that pro-
vides sucient airow around the panels. It is recommended that the Nanoleaf Aurora be installed away from other devices designed to receive or
transmit radio signals. Locate your Aurora within 20 meters from your home wireless (Wi) router with at most one wall between them.
Connect the controller to any free edge on any panel. Then connect the power supply to the wire coming out of the controller. Use the included
mounting tape to securely attach the panels and controller to your desired at surface. Click here to watch an instructional video on how to install
the panels using the provided mounting tape. Once everything is set up. Connect the power cable to an AC outlet in order to power up your Aurora.
Toggle Button:
cycle through existing
scenes/animations
Power Button:
Turn the Aurora
panels on or o
Linker