Aurora Instruction Manual
WELCOME Congratulations on becoming an official owner of the Nanoleaf Aurora, a product that will let you create i n c r e d i b l e l i g ht i n g d i s p l a y s b y snapping together panels with ease.
WHAT’S IN THE BOX? x9 x9 Panels Stencil Paper x1 Controller x9 Linkers x1 x28 Power Supply Mounting Tape
HARDWARE SET-UP Slow down tiger! Before you stick the panels onto the wall, be sure to plug it in and try it out on a table first. Linker Toggle Button: cycle through existing scenes/animations Power Button: Turn the Aurora panels on or off To connect the panels together, insert a linker into the linker port on the reverse of the Aurora panels. Ensure that the metal contacts are aligned, and gently snap the panels together. Connect the controller to any free edge on any panel.
SOFTWARE SET-UP The software setup will be easiest if your Aurora is powered on and you see colors moving across it. Boot up time for your Aurora is about 1 minute. 1. Download the “Nanoleaf Smarter Series” app from the Apple App Store or Google Play Store and launch it. 2. Go through the setup steps in the App to connect your Aurora to your home network and pair with your device. CONTROL VIA APP Animations make up the core of the Aurora software experience.
CONTROL VIA APP 3. Effect: this is how the Aurora will display your color palette. a. Static: Tap a Palette color and tap a panel to paint it. Hold your finger over a panel to change the brightness of that individual panel. b. Random: This will take your Palette colors and randomly animate them across your panels. c. Flow: Imagine pouring each Palette color onto your panels. Watch the color flow in a direction of your choosing. d.
VOICE CONTROL You can easily control your Aurora by voice in a few different ways. In the App, make sure to name your Aurora something easy to say. Siri “Turn [My Aurora] on/off.” “Set [My Aurora] to 10% brightness.” “Dim [My Aurora].” “Set [Animation Name]” “Set [My Aurora] to Green” Amazon Echo Planned support for Q4 2016 with commands to be announced.
TIPS & TROUBLESHOOTING The following recommendations can help your Nanoleaf Aurora achieve the best wireless range & network reception. Best Locations for Nanoleaf Aurora: ▪ Place your Aurora in an open area where there are few obstructions, such as large pieces of furniture or walls. Place it away from metallic surfaces. ▪ Avoid placing your Aurora behind furniture or inside cabinets. ▪ Don‘t place your Aurora in areas surrounded by metal surfaces on three or more sides. This can cause signal issues.
I can’t see my Aurora in the App for setup: 1. If the Wifi status indicator is lit: a. Make sure your mobile device wifi is on. b. Try moving your mobile device closer to your Aurora. The App connects directly to the Aurora in order to setup wifi. c. Try turning your mobile device wifi off and back on 2. If the Wifi status indicator is not lit, your Aurora is already on a wifi network. a. Make sure your mobile device is on the same network b. Try turning your mobile device wifi off and back on. 3.
SUPPORT For technical support and assistance for your Nanoleaf Aurora, Please go to helpdesk.nanoleaf.me. FAQ Please visit our online user manual page for a complete list of frequently asked questions and answers: www.nanoleaf.me/myaurora WARRANTY Nanoleaf Aurora is protected under a 3 year limited warranty. Please visit www.nanoleaf.me/myaurora to register for and download the warranty.
HARDWARE COMPLIANCE & CERTIFICATIONS Nanoleaf Aurora adheres to the certification requirements for various regions around the world. To see a full list of Nanoleaf Aurora certifications and to ensure Nanoleaf Aurora complies with the certification requirements in your region, please go to www.nanoleaf.me/legals. This device complies with part 15 of the FCC Rules.
ISEDC Radiation Exposure Statement: This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. Cet appareil est conforme aux limitesd’exposition de rayonnement RF ISEDC établiespour un environnement non contrôlé.
WARNINGS & CAUTIONS Please read this safety information carefully and keep this user manual for later reference. Nanoleaf Aurora is not designed for use in: ▪ Enclosed locations that limit the flow of air and/or trap excessive amounts of heat ▪ Emergency exits or emergency lights ▪ Conjunction with 3rd party sensors/timing devices that are not approved by Nanoleaf® ▪ Places where there is a risk of electric shock ▪ Outdoor areas ▪ Wet or damp conditions ▪ Excessively hot environments (e.g.
DESIGN IDEAS The more the merrier! Here are just a few examples of what you can create with more Aurora panels: with 9 Panels The Napping Unicorn The Matrix Crown The Free Bird The Swanky Pacman The Cuddly Giraffe The Sparkly Nemo The Lovey Dovey with 12 Panels The Dodgy Ram with 15 Panels The Siamese Diamond The Homely Mountains The Huggable Sloth The Snuggling Kittens with 30 Panels The Slurpasaurus Rex The Divine Infinity The Wiggly Worm
GET SOCIAL Share your masterpiece with us! Let your voice be heard! Leave a review for this product by visiting: nanoleaf.
