Installation Guide

C. Place the camera above the screen using the included mount OR
on a surface below the screen without the mount (secure to surface
with tape if desired).
D. Connect the lightstrip and camera cables into the Controller
(secure to the back of your screen with tape if desired), and plug in
to power.
A. Wipe the back of your screen to ensure it is dry and clean.
OPTIONAL Use the tape provided and attach corner brackets to the
back of the screen (at least 1" away from the edge).
Step 1: Setup
Skip to Step C if you have the Screen Mirror Kit (Camera Only)
B. Adhere the lightstrip around the back of your screen (bending
around corner brackets, if used).
1”