MSDS

MSDS - Material Safety Data Sheet
Product Name: Dry Nano Lubricant 11 FL OZ
Item No. NDT11D
3
Principal Hazardous Component(s)
CHEMICAL AND OSHA ACGIH VAPOR FLASH
COMMON NAME(S) CAS # PEL TLV PRESS @ 25 DEG. C LEL UEL POINT DEG. F Wt %
Heptane 142-82-5 400ppm 400ppm 45 mmHg 1.2 6.7 <20(TCC) 20 - 30
Isopropyl Alcohol 67-63-0 400ppm 400ppm 31 mmHg 2.2 12.0 53(TCC) 40 - 50
Liquefied 68476-86-8 1000ppm 1000ppm 109 psig 2.2 9.5 -156(TCC) 30 - 40
Petroleum Gas
N/A is not available or not applicable
Emergency and First Aid Procedures:
Eye Contact: Flush eyes with clean water for 15 minutes while lifting eyelids. Get prompt
medical attention.
Skin Contact: Wash skin with soap and water thoroughly. If adverse effects persist, get prompt
medical attention. Remove and isolate contaminated clothing. Launder contaminated clothing
before reuse. Inhalation: Move victim to fresh air. If breathing becomes difficult, get prompt
medical attention.
Ingestion: DO NOT INDUCE VOMITING! Call Poison Control Center, physician, or hospital
emergency room immediately. Aspiration of vomitus into the lungs can cause pneumonitis,
which can be fatal.
Section 4. First Aid Measures: