User's Manual

ZG-7600H-P User Manual
Chapter 5 Advanced Configuration
Page 14
You must configure RADIUS Server Settings with either Legacy 802.1x, WPA or WPA2
option.
 Authentication Server
This configuration is required for authentication using RADIUS. IP Address, Port No. and
Shared Secret is required for communication with RADIUS Server.
 IP Address: IP address of the RADIUS Server. The default is 0.0.0.0
 Port Number: Port number of the RADIUS Server. The default is 1812.
 Shared Secret: This is shared between the Wireless Access Point and the RADIUS
Server while authenticating the supplicant.
Bridge Mode Setup
In Wireless Settings page, you could set operation mode to bridge. And you should input remote
MAC address to setup WDS link.