User's Manual

ZDC ZA-5000-D User's Manual V2.3.2
Chapter 6 Troubleshooting
Page 46
• Wireless Channel/Frequency
Try to change other channel
• Wireless disturbance
Check whether there are other wireless equipments nearby AP; make sure they do not
disturb AP.
Q 5. The wireless becomes unstable such as ping timed out and lose packet after a period of
well work?
This situation may the wireless network is disturbed by something, what you can do is
following steps:
(1). check whether every joint point of network is well（such as Ethernet port，antenna
connection）
(2). Change the channel if the Link Test value is not high，excluding other wireless
equipments disturb AP.
(3). Restart AP.
(4). Default AP and restore last settings.
(5). Please call the sales if can not solve problem after all.
Q 6. How to adjust output power?
In the Wireless Settings page, you can do it.
Diagram 10 Output Power
Full 1/2 1/4 1/8 Min
Output Power 18dbm 15dbm 12dbm 9dbm 6dbm
Q 7. Why can not open WEB page of remote wireless bridge in local network?
Because this kind of settings will slow the response of remote AP WEB Server, just waiting
for several minutes or restarting remote wireless bridge is a way to solve problem. We
suggest you set AP in local wired Ethernet network.
Fixed power level.