User's Manual

ZDC ZA-5000-D User's Manual V2.3.2
Chapter 4 Advanced Configuration
Page 34
Notice
Enter a 32-character (maximum) Service Set ID in this field; the characters are case sensitive.
When in infrastructure mode, this field defines the Service Set ID (SSID). The SSID assigned
to the wireless node is required to match the SSID in order for the wireless node to
communicate with the Access Point.
z Beacon Interval
Specifies the interval time (20~~1000ms) for each beacon transmission.
z DTIM Interval
The Delivery Traffic Indication Message, Specifies the data beacon rate between 1 and 255.
Because the limitation of wireless network, you can realize security by authentication, data
encryption and access control. At the same time, you can use wireless client security
separator to protect client. The detail is list in
Wireless Security Settings, Wireless Access
Control
and Wireless Isolation.
“AP + Bridge” Mode Application
In “AP + Bridge” mode, you can use it both wireless bridge connection and wireless hotspot
cover.
Figure 26 “AP + Bridge” Mode Application
Set Operating Mode as “AP + Bridge” mode in Wireless Settings page.
The settings of AP mode are list in Outdoor Wireless Cover Application .
The settings of Bridge mode are list in Outdoor Wireless Repeater Application and Outdoor
Point to Multi-Point Bridge Application
chapter.