User's Manual

ZDC ZA-5000-D User's Manual V2.3.2
Chapter 3 Basic configuration
Page 20
Outdoor Wireless Repeater Application
Here we will introduce you how to build such network quickly
We suggest you should first builds networks between two wireless bridges indoor and the
connection is normal then take them outdoor.
Access Points builds connection by WDS (Wireless Distribution System) mode. The main setting
is remote MAC address. The following steps are the way. Step from 1 to 5 is taken indoor; step 6
should take Access Points outdoor.
1. After power on two Access Points, use two notebook computers to connect each of them by
network cable. As the following figure. Sets the IP address.
Figure 12 Wireless Repeater Connection
2. Open the AP web configuration by using IE with IP of 192.168.0.228, user name of admin
and password of password. Open Wireless1 and Wireless2 “WDS Settings” page, and add
MAC address of remote wireless bridge. As following figure.