User's Manual

ZDC ZA-5000-D User's Manual V2.3.2
Chapter 3 Basic configuration
Page 16
48 5240
52 5260
56 5280
60 5300
64 5320
100 5500
104 5520
108 5540
112 5560
116 5580
120 5600
124 5620
128 5640
132 5660
136 5680
140 5700
149 5745
153 5765
157 5785
161 5805
165 5825
z Data Rate
The available transmit data rate of the wireless network. The AP will choose the highest data
rate to transmit data in Best mode. You also can choose lower data rate in order to transmit
data in longer distance.
z Output Power
Adjust the transmit power of the Access Point. The more the Output Power the more area of
the wireless signal can reach. Its default value is Full.
z RTS Threshold
Request to Send Threshold. Its value is from 0 to 2346 bytes, RTS is designed to solve
Network collision. It will make signals lose if two stations send data to AP at the same time.
When the transmitted data size is larger than RTS threshold, the RTS mechanism will be
active. The transmitting station sends out an RTS packet to the receiving station, and waits
for the receiving station to send back a CTS (Clear to Send) packet before sending the actual
packet data. The other station which have listen the CTS will waits for a time before send
data. The default value is 2346 and not active. If set it to zero, this function will be active

Fixed power level.