User's Guide

ZA-4000 User’s Manual
Figure 29SNMP
Device supports SNMP. At first you should set SNMP settings and get MIB file from device by
ftp.
1. SNMP Settings.
a) Set the Trap Server Address;
You can find the unusual log on the Trap Server.
b) Set the Read-only Community;
c) Set the Read-write Community;
d) Click the “Apply” button to save setting.
2. Get MIB file by ftp
a) Login device by ftp.
b) Input command “get za4000.mib”, you will find the mib file in current directory.
Notice:
λ The file name must be za4000.mib.
- 38 -