User's Guide

ZA-4000 User’s Manual
Switzerland 36-64
Taiwan 56-64,149-161
United Kingdom 36-64,100-140
United States 149-161
 Configure Device as a：
Configure device, enabling it as a Bridge or a Router. AS a bridge, you can configure IP
address, subnet mask, gateway, Primary DNS Server and Secondary DNS Server. As a Route,
Please consult
Configure device as a Router.
 IP Address：
Two types of IP address in the bridge mode described below.
λ Static IP: Manually configure IP address, subnet mask, gateway, Primary DNS Server
and Secondary DNS Server. The Device will automatically understand the subnet mask
based on the assigned IP address. Otherwise, you can use 255.255.255.0 as the subnet
mask.
λ DHCP Client: device will obtain IP’s settings from DHCP Server automatically during
boot-up.
 Spanning Tree：
If enable this function, Spanning Tree Protocol can detect the network loop link and avoid
broadcast storm.
 Time Server：
You can input your Time Server IP Address. Default: Null.
 Time Server Port
Input your Time Server Port, Default: 123.
 Time Zone
You may select appropriate Time Zone.
 Current Time
You can get current time from your Time Server.
- 13 -