User's Guide
Table Of Contents
ZA-4000 User’s Manual
SNMP Enable
Trap Server IP 0.0.0.0
Read Community public
Write Community private
IP and MAC Access
Control
Disable
SysLog OFF
Using the Web Management
Follow the steps below to configure an CPE operating setting using the WEB interface.
1. Open a web browser on a network computer. The WEB interface supports the following
browser. Microsoft Internet Explore 6 with Service Pack 1 or later. Netscape 6.1 or later
2. Enter the device’s IP address
http://192.168.0.228 in the browser’s Address field and press
Enter, After press Enter key then pop up a security alarm page, the page will show up. Click
yes button, the login page will show up.
Figure 3Security Alert
3. Choose
YES and a login window will be seen as below:
- 9 -