User's Guide

ZA-4000 User’s Manual
Chapter 3 Basic configuration
Default Settings
When use this product for the first time, the default settings as the below diagram will be seen, or
restore it refer to
Restore to Factory.
Diagram 1Default Settings
Options Default Value
User Name admin
password password
System Name STAxxxxxx（xxxxxx indicates the last 6 of MAC
address of STA）
Country/Region China
Configure Device as a Bridge
Spanning Tree Enable
IP Address 192.168.0.228
IP Subnet Mask 255.255.255.0
Default Gateway 0.0.0.0
Primary/Secondary
DNS Server
0.0.0.0
Time Server N/A
Time Server Port 123
Time Zone (GMT): Dublin, Edinburgh, Lisbon, London
Adjust for Daylight Saving
Time
OFF
Operation Mode CPE
Wireless Network Name Wireless
BSSID 00:00:00:00:00:00
Data Rate Best
Output Power Full
RTS Threshold 2346
Fragmentation 2346
Space from AP
10000
Enable Super-A Mode No
Enable TDM No
Authentication Type Open System
Encryption Strength None
SSH Enable
- 8 -