User's Guide

WIIBOOX LIGHT-3D Printer User Guide
WIIBOOX LIGHT-3D
打印机用户指南
Page 5 of 16
主要部件 Main part
防尘遮光盖
Dust-proof shade cover
电源开关
Power switch
平台固定螺丝
Platform set screws
调节脚垫
Adjustment footpad
打印平台
Printing platform
散热孔
Heat emission hole
材料盘
Material plate
电源插口
Power socket
材料盘固定螺丝
Material plate fixing screw
LCD 成型模块
LCD molding module
3D 打印技术词汇 3D Printing Technology Term
LCD 光固化 3D 打印技术
一种依靠固化光聚合物的技术。LCD 光固化 3D 打印技术涉及在材料盘下投射连续层的图像，使用液态树脂并使用
紫外光固化它们。
LCD Photocurable 3D Printing Technology
A technology is that relies on curing light polymers. LCD photo-curing 3D printing involves projecting images of
continuous layers under a material plate and cures them by liquid resins and UV light.
防尘遮光盖
防尘遮光盖在打印机的顶部，负责保护液体树脂环境紫外线以及粉尘进入材料。它还有助于在打印中减少令人不快
的树脂气味。
Dust-proof shade cover
Dust-proof shade covers the top of the printer and is responsible for protecting the liquid resin environment from ultraviolet
rays and dust entering the material. It also contributes to reduce unpleasant resin odor in printing.
Z 轴
负责打印平台的上升和下降，由平面的固化逐渐形成立体。
Z axis
Be responsible for the rise and fall of the printing platform, and gradually form three-dimensional from the from the
solidification of the plane.
打印平台
打印机的一个组成部分，模型在树脂聚合过程中粘附在其上。此外，它在打印过程中上升和下降，使逐层固化， 它
可以很容易地取下和安装。
Print Platform
A component of a printer is on which a model is attached during resin polymerization. In addition, it rises and falls during
the printing process and it solidify layer by layer. It can be easily removed and installed.
材料盘
在整个打印过程中盛放液态树脂的容器。它由金属框架和高分子薄膜组成。材料盘是用两个螺丝直接固定在打印机
上。材料盘属于消耗品，料盘膜在刮花、破损后需要及时更换，破损后如果继续使用将会连带损坏打印机 LCD 成
型模块。
Material plate
A container keeps liquid resin throughout the printing process. It consists of a metal frame and a polymer film. The material
plate is fixed directly on the printer by two screws. Material plate belongs to consumables. Material plate film needs to be
replaced timely after scratching and breakage. If it continues to use after breakage, it will damage the printer LCD forming
module.
LCD 成型模块
LCD 成型模块是 LCD 光固化 3D 打印技术中至关重要的部件。它是负责用于在整个材料盘底面上投影图像并掩盖
其他紫外线，使树脂在图像之外区域不会固化。它属于打印机的一个消耗品，制造商质保期为 2 个月，但容易拆取
和更换。
LCD Molding Module
LCD molding module is an important component in LCD photo curing 3D printing technology. It is responsible for
projecting the image on the bottom of the entire material plate and covering up other ultraviolet rays so that the resin will
not be solidified outside the image area. It belongs to a consumable of printers. The manufacturer's warranty period is 2
months, but it is easy to dismantle and replace.
触摸屏
触摸屏位于打印机前部，可实现快速直观的进行设备操作。屏幕还显示当前的打印过程和有关打印机的其他信息。
Touch screen
Touch screen is located in the front of the printer and can realize fast and visual device operation. The screen also displays
the current printing process and other information about the printer.