User's Guide

WIIBOOX LIGHT-3D Printer User Guide
WIIBOOX LIGHT-3D
打印机用户指南
Page 4 of 16
into a single layer and saving it as a DJS file. The slicing software also permits you to select the material type for the model
and adjust the necessary printing settings, such as layer thickness, exposure time, etc.
3. Be ready to start the printing process, please open the printer, prepare the material y with your selection in the slicing
software, and carefully pour the appropriate material into the printer's material plate(the printer with automatic feeding
function can directly load the material box into the printer).
4. When using “Wiibox Linght”, you allow to start, pause and stop (the manufacturer does not recommend the pause
function, causing the printing failure or influence the accuracy of the printing model).
5. When the files are prepare well, store them on the U-flash and insert them into the front-end of the device. Copy the files
to the printer and start printing.
产品规格 Product Standard
机型技术
LCD 面成型
成型尺寸
130
（
L
）
*70
（
W
）
*180
（
H
）
MM
适用行业
工程零件
,
手办模型，珠宝模型、牙科应用等
xy
分辨率
0.0026mm²
打印层厚
0.03-0.1mm
打印速度
10-20mm/h
内存
8G
文件格式
STL
软件系统
Windows7 及以上版本（仅支持 64 位系统）
传输方式
U 盘传输
软件
Wiiboox slicer
耗材属性
丙烯酸酯光敏树脂 （液体光敏树脂）
打印耗材
标准树脂，强韧性树脂，铸造树脂、耐温树脂、弹性树脂
设备电压
220V/110V
设备功率
120W
设备尺寸
W270*D230*H375mm
设备重量
10KG（含包装）
工作环境
20℃-28℃
建议环境
Suggestion environment
操作环境：放置在通风良好的无尘区域；温度：20℃-28℃；湿度：20%-80%(无冷凝）。
存放环境：温度：0℃-40℃；湿度：10%-80%(无冷凝）；无腐蚀气体存在且清洁的场合。
Operating environment: Place in a well-ventilated and dust-free area; temperature: 20-28℃; humidity: 20-80% (no
condensation).
Storage environment: temperature: 0 - 40℃; humidity: 10% - 80% (without condensation); no corrosive gas and clean
occasions.
包装清单 Pack list
3D 打印机 材料 电源线 一次性手套 塑料铲刀 六角扳手
3D Printer Material Power cord Disposable gloves Plastic spade Hexagon wrench
过滤网 料盘膜*1 USB 校准平台纸
Filter screen Material plate film*1 Calibration Platform Paper
Type technology
LCD Surface Forming
Forming dimension
130(L)*70(W)*180(H)MM
Applicable industries
Engineering parts, hand-made models, jewelry models, dental
applications, etc.
XY resolution
0.0026mm²
Printing layer thickness
0.03-0.1mm
Printing speed
10-20 mm/h
Internal storage
8G
File format
STL/OBJ
Software system
Windows 7 and above (64-bit system only)
Transmission mode
U-flash transmission
Software
Wiiboox slicer
Consumables attributes
Acrylate photosensitive resin (Liquid photosensitive resin)
Printing consumables
Standard resin, obdurability resin, casting resin, temperature
resistance resin, elastic resin
Equipment voltage
220V/110V
Equipment power
120W
Equipment dimensions
W270*D230*H375mm
Equipment weight
10KG
Work environment
20℃-28℃