User's Guide
Table Of Contents
- Workplace health and safety工作场所健康与安全
- Electric Safety 电气安全
- Safety of Machinery 机械安全
- Burn Risk烧伤风险
- Safe Storage安全储存
- About "Wiibox Linght" 有关“Wiibox Linght”
- How does it work?如何运作？
- 产品规格Product Standard
- 建议环境
- Suggestion environment
- 包装清单Pack list
- 主要部件Main part
- 3D打印技术词汇 3D Printing Technology Term
- 首次使用准备工作Preparation Work for First Use
- 切片支撑软件“wiibooxslicer”使用
- Use of Slice Support Software "wiibooxslicer"
- 启动打印 Start Printing
- 后处理Post—process
- 关于打印失败的处理Treatment of Print Failures
- 更换材料Change the material
- 可用材料Available Materials
- 基本维护和服务工作Basic Maintenance and Service Work
- 支持和故障排除Support and Troubleshooting
- 回收Recovery
WIIBOOX LIGHT-3D Printer User Guide
WIIBOOX LIGHT-3D
打印机用户指南
Page 10 of 16
料
3. When being short of supplementary support, click on the left mouse button to add support point. If there is no
experience to add support points, please watch the relevant video materials attached randomly.
4. 删除多余支撑,鼠标右键删除或者“shift+鼠标左键”框选，按“Delete”键删除
4. When deleting surplus support, click right mouse button to delete or select "shift + left mouse button", and press the
"Delete" key to delete
5、支撑手动编辑完成后，应用支撑修改
5.After finish manually editing the support, apply the support modification.
6.完成支撑添加
6. Complete support addition
7.切片
7. Slice
8.预览切片，此步骤可以帮助您检测模型中是否存在破面，如有发现模型损坏必须先进行修复
8.Preview slices, and this step can help you detect whether there is a fraction in the model, If any model damage is
found, it must be repaired first.
9 . 导出“dis”文件