User's Manual
Table Of Contents
- Software specifications
- Software features
- Software functions
- 1.Introduction to “Register” and “Sign in” functions
- 2.Introduction to “Measuring ” function
- 3.Introduction to a real-time ECG waveform diagram
- 3.Introduction to “End Measurement” function
- 4.Introduction to “Data Uploading” function
- 5.Introduction to “Measurement Records” function
- 6.Introduction to “User Profile” function
- 7.Introduction of “Playback ECG” function
- 8.Introduction of online customer service function
- 9.Set Sign-in password
21
System requirements
Applicable system of this software: Android 6.0 above
Recommended hardware configuration:
Processor:ARM Cortex-M3
clock:48MHz
RAM:128KB
Date storage:128MB
ADS: 16-bit two-channel low power AD converter
Battery:CR2032 Button batteries
Network environment:2.4g low power blue-tooth
Use restrictions
This software must be used with digital via-com electrocardiograph.
Smart devices need to turn on the system blue-tooth switch.
The distance between the smart device and the ECG should be kept
within 2 meters to avoid the slow connection or disconnection caused by
the unstable blue-tooth signal.
Smart devices need an Internet connection to upload data and view
history.
Passwords are 6-20 characters long and must contain uppercase and
lowercase letters, Numbers, and special characters.
Software maintainability
On the client side, there is a software running log, which contains the user's
behavior of logging into the system, the log record of the product error, and the
status log of the communication with the ECG device.
The software will be updated automatically on a regular basis.
If there is any problem in the process of using the software, you can call the
customer service number.
Software efficiency description
On the required hardware configuration, the App can enter the main interface within
10 seconds.