User's Manual

9
RAM:128KB
Data storage: 128MB
ADS: 16-bit dual-channel low-energy analog-to-digital converter.
Battery: CR2032 cell battery
Network: 2.4G Bluetooth Low Energy
3、Operating Guide
3.1 Smartphone APP installation guide
This APP supports bluetooth enabled smartphones with at least 50M free storage
available.
Confirm the smartphone can get onto the internet;
Scan the QR code found on the product packaging or search in App Store for the SWCAN
app, download the APP;
Tap install after downloading to install the APP onto your smartphone;
The APP icon will appear on-screen once the installation is successful.
3.2 Smartphone APP feature list
Number
Icon
Function
State
Icon 1
Start
electrocardiog
ram
measurements
Start new ECG measurements.
Icon 2
Manage
connections to
devices
Tap the button to search for all nearby devices.
You can also choose to disconnect from the current
device or switch to other devices. Sometimes
disconnection could occur when there’s weak
signal between your smartphone and the device, you
can reconnect the device here. Please make sure
Bluetooth is enabled on your smartphone before
using this functionality.
Icon 3
View the 30
second real-
time ECG
Tap the button to see a live stream of your ECP
measurements for up to 30 seconds. Bluetooth
connection is required prior to using this
functionality.
Icon 4
Stop
electrocardiog
ram
measurements
Stop the ECG measurements.
Icon 5
View
measurement
results
Tap the button to see all measurement results.
Icon 6
Discard data
Tap the button to discard the data and start a new
measurement.