Specifications

Nanjing Ningyuan Intelligent Instrument Co., Ltd RM-RF10TP-1278
Address: Building 6, Jima Industrial Park, No. 669 Jiangjun Avenue, Jiangning District, Nanjing, Jiangsu, China
5
/ 16
III. Mode Configuration
* Note: The switching mode takes 100ms effective time.
Table 5: Module Mode Configuration
Module mode
Pin configuration
Remarks
Upgrade mode
(Custom required)
MD0=0, AUX=0
The MD0 foot is low level, the AUX foot is low level,
and the module enters firmware upgrade mode after 1
s. In this mode, the module can be upgraded by serial
port and configuration tool software.
Configuration
mode
MD0=1, AUX=0
The MD0 foot is high level(suspended) , the AUX foot is
low level, and the module enters the configuration
mode after 1 s. In this mode, the module can be
configured by serial port.
Transmission mode
MD0=1, AUX=1
The MD0 foot is high level(suspended) , the AUX foot is
high level(suspended) , the module enters the
transmission mode; All the data received by the serial
ports will be encapsulated and sent using a radio
broadcast. All received legitimate wireless packets will
be released and sent through the serial port.