Specifications

Nanjing Ningyuan Intelligent Instrument Co., Ltd RM-RF10TP-1278
Address: Building 6, Jima Industrial Park, No. 669 Jiangjun Avenue, Jiangning District, Nanjing, Jiangsu, China
12
/ 16
Channel: channel: 00(433 MHz)
Restoration of
factory
settings
Send: 68 02 16
Return: 68 22 00 01 03 00 16
Send: 68 02 16
Return: 68 22 00 01 07 00
16
Send the recovery factory instruction to the module,
the module will reset all parameters and reply.
The default parameters of the module are:
Addr: address: 0001
Speed: rate: 07(1.8 Kbps)
Channel: channel: 00(433 MHz)
Module Reset
Send: 68 03 16
Return: 68 22 <Addr> <Speed>
<Channel> 16
Send: 68 03 16
Return: 68 22 12 34 07 00
16
Send module reset instruction to module, module will
restart, and reply.
The module responded:
Addr: address: 4660
Speed: rate: 07(1.8 Kbps)
Channel: channel: 00(433 MHz)
Turn off echo
Send: 68 04 00 16
Return: No return
Send: 68 04 00 16
Return: No return
Send to moduleTurn off the echo command
The module will not make any reply.
Open echo
Send: 68 04 01 16
Return: 68 22 <Addr> <Speed>
<Channel> 16
Send: 68 04 01 16
Return: 68 22 12 34 07 00
16
Send open to moduleEcho command
The module returns to the latest parameters:
Addr: address: 4660
Speed: rate: 07(1.8 Kbps)
Channel: channel: 00(433 MHz)
Read device
information
Send: 68 11 16
Return: 68 12 <Type> <Ver.> 16
Send: 68 11 16
Return: 68 12 01 02 01 09
16
Send instructions to the module to read device
information,
The module responded:
Type: equipment type: 0102
Ver.: firmware version: 1.09
Setting device
parameters
(Current
version of
wireless rate is
unconfigurable
and
customized on
demand)
Send: 68 21 <Addr> <Speed>
<Channel> 16
Return: 68 22 <Addr> <Speed>
<Channel> 16
Send: 68 21 12 34 07 00 16
Return: 68 22 12 34 07 00
16
Send the set device parameter instruction to the
module and set the parameter to:
Addr: address: 4660
Speed: rate: 07(1.8 Kbps)
Channel: channel: 00(433 MHz)
The module returns to the latest parameters:
Addr: address: 4660
Speed: rate: 07(1.8 Kbps)
Channel: channel: 00(433 MHz)
4.5.3 Instruction Parameter Description
Address: Addr: module address number, Hex code 2 bytes.
Set address: 0000~65535: [0x00 0x00]~[0xFF 0xFF];
Among them [0x00 0x01] is factory default address , [0xFF 0xFF] is broadcast default address,
do not recommend equipment use;
Rate: Speed: module communication air rate, Hex code 1 byte.
The following is the corresponding relationship between the Wireless rate and the Value:
* Note: [0x07]: 1.8Kbps is the most stable test rate, the current version is not configurable
and can be customized on demand.
Rate
0.1 Kbps
0.14 Kbps
0.21 Kbps
0.3 Kbps
0.45 Kbps
0.6 Kbps