Safety Information

Set Ethernet

The device automatically detects and connects to the Ethernet when

networking to a DHCP-enabled LAN. Or you can set the IP address manually

for a fixed IP address or an auto-networking failure.

Network

Networking information, including Ethernet, Wi-Fi and AP, can be set in the Network tab.

Set IP address manually: turn on the switch to modify current network

setting or when being connected to a non-DHCP network.

■

IP address: device IP address.

■

Subnet mask: device subnet mask.

■

Network gateway: device gateway.

■

DNS: DNS server IP address.

■

Apply: make current configuration effective. When prompted, click Yes.

■

Verify: input new IP address to open the Web UI.

■