Safety Information

NDI HX

Save: save current configuration.

■

The encoder can stream up to 6 SRT sessions simultaneously, containing

one SRT Listener session at most. If the unit streams via wired network, the

total code stream is recommended to below 24 Mbps, below 16 Mbps via

wireless network.

■

After configuration, the play URL and passphase are shown in the page

below.

■

Name: specify a name for current task to facilitate server management,

which will be displayed in server list.

■

Source Video

■

Group name

Specify the Group name which the source belongs to. It is case-

insensitive, and should be a combination of A to Z, a to z, 0 to 9 and

special characters like _-. Multiple groups are supported, which should

be comma-separated.

By default, it is public.

■

Source name

By default, it is #serial-no#, serial number.

■

Discovery Server: turn on the switch to auto-detect a source sender in

different network segment and ping the sender. And the Server IP should

be the IP address of the server running discovery server software. By default,

the switch is off.

■

Failover: turn on to protect your NDI transmission from failure. If the initial

■