User's Manual

99
No Key Entry Timeout
No Key Entry Timeout means that when you enter the number, it will dial out automatically after some
time when you stop enter the number.
To configure No Key Entry Timeout via Web interface:
1. Click Setting→ Preference
2. Fill the blank of No Key Entry Timeout: for example, 5(seconds).
In seconds,0 means will not timeout, you should press the Dial key to dial out the number, default is 0
seconds, max is 29 seconds (between 0 to 29).
3. Click the button to save the configuration.
Label Scroll
When setting function keys, you need to set the label of the function keys. If the words are too long to
show on the label, you can use this function to make labels scroll. Another approach is to set the labels
to Long Label mode.
To configure Label Scroll via Web interface:
1. Click Setting→ Preference
2. Select Enable or Disable for Label Scroll.
3. Click for the setting.
Show Missed Calls
Whether to show missed call notification on LCD.
After turning off this function, all missed calls will not be displayed. If there are missed calls after turning
it on again, the total number of missed calls during turning off and after turning on again will be
displayed.
Note:
1. If it is turned on again, the missed call count during the closed period will not be
displayed immediately but will be displayed together after the missed call count is
increased again.
2. The data before closing Miss call will be cleared.
To configure Show Missed Calls via Web interface:
1. Click Setting→ Preference
2. Select Yes or No for Show Missed Calls.
3. Click for the setting.