User's Manual

65
How to Pair the Bluetooth Headset to the Phone?
Open the Bluetooth pairing mode on Bluetooth headset:
1. Turn on the Bluetooth headset.
2. Long press the multifunction key on the Bluetooth headset until the indicator LED alternately flashes
red and blue.
The Bluetooth headset is in pairing mode.
How to scan the Bluetooth headset device on phone interface:
1. Select "Paired Bluetooth Device". Press the "Scan" button on phone interface:
2. The phone will enter the scan interface, the phone starts searching for Bluetooth headsets within the
working range of 10 meters (32 feet).
3. All detected Bluetooth headsets will display on the phone:
4. Choose the desired Bluetooth Device from the list and connect to it:
5. If the Bluetooth Device is connected/paired successfully, you will see the “Connect Success!” and
connected successfully icon.
6. If you want to disconnect with this Bluetooth device, you can press the “Enter” button, then press the
“Disconnect” button.
7. When you back to idle interface, you will see the connected successfully icon:
How to edit device information?
How to edit device information on phone interface:
1. Find Menu then navigate as follows:
Menu->Settings->Basic Setting->Bluetooth: Edit Device Information.
2. Press the enter button, you can edit the Device Name:
Note:
The phone must be in the headphone mode to normally use the Bluetooth function.