User's Manual

How to configure

Log into webpage, Profile  Basic  Transfer Release Trigger.

1. NOTIFY with 200OK

After receiving REFER request send by phone, the server will send NOTIFY to the phone, and the

phone response 200 OK, this is the trigger for the phone to release the call.

2. 2xx response of REFER

The phone will not release the call until it receives a 2xx response from the server to the phone's

REFER request.

3. BYE for the call

The phone will not release the call until receiving BYE from the server.

Call Conference

This IP Phone supports up to 10-way audio conference.

Take the five-way conference for example:

Assuming that A and B are in conversation. A wants to bring C (or D & E) in a conference:

1) A tap , the call is placed on hold.

2) A enters the number of C and then taps or , C answers the call.

3) A taps , then A, B and C are now in a conference.

4) If add D&E, A taps , the current conference is on hold, taps and dials D, D answers

the call. A taps and and dials E,E answers the call. A presses , then A, B, C, D, E are in

conference.

Note:

1. If C does not answer the call, A can back to continue the conversation with B;

2. Once A hangs up the call, the conference is ended, while if B or C drops the call,

A&C or A&B continues the conversation.

3. The conference feature is not available on all servers. For more information,

contact your system administrator.

4. To realize the 5-way conference, the line should be all available.

Call Forward

This phone supports static forward (always forward, busy forward and no answer forward) and dynamic

forward.

To configure static forward

To configure always/busy/no answer forward via Phone interface:

With this feature, all incoming calls will forward immediately to configured number.

1. Tap Forward or Menu  Forward

2. Select the desired forwarding type and tap from the corresponding field.

3. Enter the Forward to number.

4. Tap Save to save the configuration.

When the Forward feature is enabled, the Icon will display on top right of the LCD.

To configure Forward via Web interface