User's Manual

116
To wake up screen saver via Web interface:
1. Setting→ Preference
2. Choose Dial First Digit: Screensaver Wakes up or Screensaver Wakes up and Dial
3. Click to save the configuration.
Note:
1. The upload Photo size should be less than 2MB, name length should be less than
48 characters, and the File name should be letters, numbers or underline '_' and
photo number should be less than 9.
2. The default screensaver photos cannot be deleted.
3. You can only upload screen photos in format of '.bmp' and '.jpg'.
Backlight
To set Backlight via Web interface:
1. Click Setting→ Preference
2. Enter the time for Backlight time (In seconds).
The default is 0, which means Backlight is always on.
3. Click to save the configuration.
Note:
Backlight Time refers to the time into the backlight.
Time and Date
Time and date is displayed on the idle page, and it can be set automatically by SNTP server or manually
by manual setting.
To configure the time and Date by SNTP setting via Phone interface
1. Press Menu→ Settings→ Basic Setting→ Time & Date→ SNTP Settings
2. Press and or Switch soft key or press and press and to change the
Time zone.
3. Fill in the NTP Server1, NTP Server2, and select the mode of Daylight Saving.
4. Press Save soft key to save the configuration.