Installation Guide

Add the turf fill.
a. Use a large brush broom to make the turf
blades stand up.
b. Apply the turf fill, using a drop spreader,
to the brushed turf area.
c. Make sure to spread the fill evenly as possible
across the brushed turf area.
d. Once the fill has been spread evenly, brush it
in lightly to create a finished look.
e. The artificial turf grass blades should be
standing straight up with turf fill underneath.
Make sure your area is flat and has been
graded to level.
Next measure your area and map out where
the artificial turf will be installed.
Once you have a proper substrate
(concrete, rock bed, or sand) you are ready
for installation.
Take your time and move slowly when making
cuts (only from the back) during the installation
process, make sure to keep the turf blades going
in the same direction when installing
Warranty
4
Use a weighted roller as you are installing the
turf down to your substrate. This will help
prevent bunching or creases.
5
6
OUTDOOR INSTALLATION
Limited Lifetime Warranty