YOUR SPEAKER Dear Customer, Congratulations on purchasing our Michigan mobile system product for your sound system. This product has been designed and manufactured to Michigan's exacting standards fo ensure many years of audio enjoyment. For the best performance, we recommend that you have your Michigan product installed by an authorized Michigan dealer.
* Securely mount the product so that it does not come loose in the event of a collision or as a result of repeated vibrations that might occur during normal operation. * Installation of the apparatus must be done with great care to prevent damage fo your vehicle's fuel lines, power, and other electrical wiring, hydraulic brake lines, and other systems. If possible, always visit your nearest Michigan dealer to perform the installation. » Do not run any wiring outside or underneath the vehicle.
INSTALLATION Mount The Cooler On Door (Front Or Rear) You can mount the speakers on the front/rear door of your car. * Make sure that nothing abstracts around the mounting location of the door. © A hole for mounting may already be cut out of the inner panel of the door{front or rear). If so. you need fo modify the board only. * Ensure that the speaker terminals, frame or magnet do not interfere with any inner parts, * (such as the window), etc.
Mount the Tweeter > option: Flush mounting HOW TO COMPLETE THE WIRING. Connect the woofers, mid-range and the tweeters to the 3-way crossover network first, then connect the network to your amplifier or car audio directly. * Consult the diagram below. Be sure to connect corresponding terminals, i.e. to and "fo". Connection with reversed polarity will degrade the quality of production. * Connect the provided speaker cord to the speaker terminal while holding the lower portion of the speaker terminal.
