Specifications

Contents
Section Page
Contents
1 UnitiServe-SSD Hard Disk Player Introduction 1
1.1 UnitiServe-SSD User Interfaces 1
1.2 UnitiServe-SSD Interface Options 2
2 Getting Started 3
2.1 Internet/Network Connections 3
2.2 Power Supply Connection 3
2.3 Audio Connection 3
2.4 Switch On 3
2.5 External Screen Setup 4
2.6 First Use 4
2.7 Software Upgrade 4
2.8 Switching Off 4
2.9 Data Backup 4
3 Getting Connected 5
3.1 UnitiServe-SSD Rear Panel 5
3.2 UnitiServe-SSD Connections 5
4 The Display Interface 6
4.1 The Home Menu 6
4.2 The Browse Music Menu 7
4.3 The Find Music Menu 8
4.4 The Internet Radio Menu 8
4.5 The Current Playlist Screen 9
4.6 Playlists 10
4.7 The Quick Play Menu 11
4.8 The System Menu 11
5 Playback 16
5.1 Local Playback 16
5.2 NaimNet Network Playback 16
5.3 UPnP™ Network Playback 16
6 Ripping 17
6.1 The Ripping Process 17
6.2 Copyright Issues 17
7 External Storage 18
7.1 USB Storage Devices 18
7.2 Network Shares 18
7.3 Music Stores 18
7.4 Adding a Music Store 19
8 Interface Menu Structure 21
9 Hard Disk Player Terminology 22
10 UnitiServe-SSD Specifications 24
11 User Notes 24
12 Commercial Acknowledgements 25
12.1 DigiFi End-user License Agreement 25
12.2 StreamNet Acknowledgement 25
12.3 Adobe Flash Acknowledgement 25
Note: This manual is issue No. 3 and describes the operation
of UnitiServe-SSD units running software release version 1.6b.
UnitiServe-SSD units running earlier software will not operate
fully in the manner described in this manual. The software
running in an UnitiServe-SSD is displayed in the System Status
menu.