O W N E R S M A N U A L Integrated Amplifier
page 1 1.0 Equipment Installation 1.1 cables and connections 2 2.0 Getting Started 2.1 2.2 2.3 2.4 2.5 switching on and off running in mains supply siting the equipment if you have a problem 3 3.0 Warnings 4 4.0 Connection 4.1 mains lead 4.2 non-rewireable mains plugs 4.3 fuse carrier 4.4 plug fuses 1.
2.0 Getting Started 2.1 switching on and off Source components and power supplies for cd players, tuners, preamplifiers and crossovers should be switched on before switching on the amplifier(s). Always switch the amplifier(s) off and wait about a minute for its power supply capacitors to discharge before connecting or disconnecting any leads. Always use the power switch on the product rather than a mains outlet switch. 2.
3.0 Warnings Naim equipment is designed to offer the finest sound quality that can be achieved, avoiding compromise wherever possible. This can lead to circumstances that may be unfamiliar. The material that follows contains advice specifically related to Naim equipment as well as more general warnings about the use of domestic audio products. Please read it carefully.
4.0 Connection 4.1 mains lead As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety earth symbol or coloured green or green-and-yellow.
Nait 5 Integrated Amplifier inputs The Nait 5 has 6 inputs - CD, Tuner, Tape, A/V, AUX1 and AUX 2. Tape, A/V and AUX 1 all have record output facilities for your cassette deck, VCR etc. The AUX 2 input is provided with two sockets. Use the right hand socket (when viewed from the rear) for commenting your usual ancillary equipment. The extra (left hand) socket is for use with separate phono stage, such as the Prefix or Stageline.
Nait series 5 front mon mute cd tuner tape A/V AUX 1 AUX 2 volume Nait series 5 rear input + power - - signal out B AUX 2 AUX 1 A/V tape tuner cd + to left loudspeaker ch1 to right loudspeaker mains input ch2 Tape, A/V, AUX 1, inputs ch1 ch 2 signal out A ch1 ch 2 link plugs fitted CD, Tuner & Aux 2 inputs ch1 ch 2 nc nc Signal out A +Vin +Vin ch 2 ch1 -ve -ve -ve please note The nait 5 features various technologies to reduce microphonic effects, in particular a compl
nait 5 connected to power supply input + power - - signal out A signal out B AUX 2 AUX 1 A/V tape tuner cd + to left loudspeaker ch1 to right loudspeaker mains input ch2 link plug fitted flatcap 2 power supply signal out A signal out B signal out C signal out D power out A power mains input for CD5, Headline or Stageline (additional interconnects required) cable Interconnect Cables direction 4 to 4 pin DIN marker 5 to5 pin DIN 7
nait 5 connected to power amp NB - do not connect nait 5 to mains in this configuration.
nait 5 connected to flatcap 2 power supply & power amp NB - do not connect nait 5 to mains in this configuration.
n2 narcom 2 remote handset NARCOM 2 is a multi-functional remote control handset designed to be used with Naim Audio CD players, integrated amplifiers, pre-amplifiers and preset tuners. The handset control configuration is based around three types of keys: System Component Keys, Global Keys and Soft Keys. 1 System Component Keys These keys switch the operation of the “Soft Keys” into modes appropriate to each system component (preamp, CD or tuner).
3 Soft Keys These keys operate functions depending on the System Component Key setting. numeric keypad: In preamp mode the numeric keys will switch between the amplifier inputs (1 - cd, 2 - tuner, 3 - tape, 4 - av, 5 - aux 1, 6 - aux 2). In cd mode the numeric keys will select tracks. In tuner mode the numeric keys will select tuner presets or can be used directly to input station frequencies. prog: In preamp mode the prog key function varies depending upon the specific amplifier model in use.
Specifications nait 5 Nominal Input Sensitivities (Tuner, Tape,CD,etc) 75mV, 100 K Overload margin, on all inputs at all audio frequencies 35dB Output Levels,Tape 75mV, 600 Power Output Continuous 8 , 30 W/ ch Transient 125 VA Mains Supply 100V, 115V, 230 V 50 or 6 0 Hz CaseSize (H x W x D) 58.
