O W N E R S M A N U A L Connection Guide
cd players 2 4 6 cds cdx cd5 8 9 9 nat 01 nat 02 nat 05 10 headline 11 stageline tuners headphones phono stage preamplifiers 12 14 18 20 nac 52 nac 82 nac 102 nac 112 a/v processor 22 c av2 integrated amplifier 24 nait 5 power amplifiers 28 29 30 31 nap 500 nap 135 nap 250, nap 180, nap 150 nap 140, nap 6-50, nap v175 power supplies 32 33 supercap, hi-cap flatcap 2 active crossovers 40 snaxo 3-6, snaxo 2-4, ixo 2 contents introduction This connection guide collects together illustrati
cd players cds cds xps track time repeat program next play previous stop display pause to preamplifier cd players cds connection to xps power supply to preamplifier mains input cable direction marker cds output Interconnects nc nc ch1 ch2 2 -ve 5-5 180˚ DIN 11-11 Burndy 3
cd players cdx cdx xps pause time repeat program next play previous stop cd players cdx connection to xps power supply to preamplifier link plug fitted power switch mains input to preamplifier mains input cable direction marker note Do not connect the cdx to mains power.
cd players play cd5 cd5 flatcap 2 link plug removed next previous power switch mains input power switch mains input cd players cd5 connection to flatcap 2 power supply stop to preamplifier link plug fitted power switch mains input rc5 input to preamplifier cable direction marker cd5 output nc nc ch1 ch2 -ve 6 note cd5 players manufactured after April 2001 are fitted with an RC5 control input. This input is designed to accept external control signals for multi-room applications.
tuners nat 01 nat 02 napst nat 05 to preamplifier power switch 75 ohm FM aerial mains input tuners nat 01 connection to napst power supply 75 ohm FM aerial to preamplifier rc5 input cable direction marker Interconnects power switch 5-5 180˚ DIN mains input 75 ohm FM aerial to preamplifier mains input 5-5 240˚ DIN nat 01 output nc nc ch1 ch2 8 -ve note The RC5 input is designed to accept external control signals for multi-room applications.
headphone amplifier headline stageline hi-cap from napsc to: nac 52, nac 82, nac 102: socket 4, 5 or 6. nac 112, nait 5: socket 3, 4 or 5. all link plugs fitted power switch mains input stageline connection to flatcap 2 to: nac 52, nac 82, nac 102: socket 4, 5 or 6. nac 112, nait 5: socket 3, 4 or 5. to preamp.
preamplifiers nac 52 nac 52 supercap volume input 2b rec source balance mute mono 2a/b 1 3 inputs +ve ch1 -ve +ve 6 4 5 preamplifiers nac 52 connection to supercap power supply to nap 140, 150 or 180 power amplifiers (4 pin DIN) or nap 250 power amplifier (4 DIN-XLR) high level inputs ch2 phono input 1 inputs 3 & 2a 6 nc nc ch1 ch2 -ve audio power supply digital power supply 5 4 3 2a 2b (blank fitted) mains input to nap 135 or nap 500 power amplifiers (4 pin to XLR) cable direct
preamplifiers nac 82 nac 82 hi-cap link plugs fitted volume rec source balance 1 inputs 3 & 2 ch1 2 1 inputs 6 napsc 5 4 3 6 4 3 5 to nap 140,150 & 180 power amplifiers napsc note The napsc power supply must be connected to the nac 82 at all times.
preamplifiers nac 82 nac 82 connection to supercap supercap napsc napsc do not use 4-4 DIN to nap 140, 150 & 180 4 DIN-XLR to nap 250 mains input 4 DIN-XLR to nap 135 & 500 direction marker Interconnects 5-5 240˚ DIN mains input 4-4 DIN to nap 140, 150 & 180 4 DIN-XLR to nap 250 do not use mains input 4 DIN-XLR to nap 135 & 500 cable cable 16 nac 82 all link plugs removed all link plugs removed hi-cap preamplifiers nac 82 connection to two hi-caps or flatcaps note Sound quality will
preamplifiers nac 102 nac 102 link plugs removed hi-cap volume mute 2 1 monitor inputs balance inputs 3, 2 & 1a nc nc ch1 ch2 link plugs fitted 5 4 3 napsc (optional) phono input 1b high level inputs 6 5 4-4 DIN to nap 140, 150 & 180 4 DIN-XLR to nap 250 nac 102 connection to one power amplifier with internal power supply outputs 6 4 3 preamplifiers nac 102 connection to hi-cap or flatcap 2 4-4 DIN to nap 140, 150 & 180 1a mains input 4 DIN-XLR to nap 135 & 500 -ve cable input
preamplifiers nac 112 nac 112 cover fitted volume monitor mute cd tuner flatcap 2 aux 2 aux 1 tape a/v preamplifiers nac 112 connection to flatcap 2 nac 112 connection to one power amplifier with internal power supply link plug & cover fitted tape, a/v & aux 1 inputs ch1 ch2 ch1 ch2 tape 4-4 DIN to nap 140, 150 & 180 aux 2 aux 1 -ve cd, tuner & aux 2 inputs ch1 ch2 nc nc -ve 20 note The aux 2 input is provided with two sockets.
a/v processor av2 av2 V1 MUL centre output encoder (sub) -ve input cen nc rc5 in dig dig data out in i/o 1 1 vs rec 1 out i/o rec out ch1 left ch2 -ve front out ch1 ch2 ch1 ch2 -ve to nap 140, 150, 180 & 250 power amplifiers power switch to nap 140, 150, 180 & 250 power amplifiers power switch mains input analogue in 2 analogue in 1 nc nc ch1 ch2 -ve rear cen sur fr’t sub dig dig dig dig dig out out out out out out in opt opt opt 2 2 out in 2 in 1 -ve an’g in 4 ch 2 right - - +
integrated amplifier nait 5 nait 5 + signal out A volume +V in +V in ch2 ch1 monitor mute cd tuner aux 2 aux 1 tape a/v - - + link plugs removed, cover fitted flatcap 2 mains input power switch -ve + tape, a/v & aux 1 inputs ch1 ch2 ch1 ch2 -ve cd, tuner & aux 2 inputs power switch mains input - - speakers ch1, left + link plugs/covers fitted in speakers ch2, right out B out A cd a/v tape tuner aux 2 aux 1 mains input power switch for cd5, headline or stageline.
integrated amplifier nait 5 connection to flatcap 2 and nap150 nait 5 nait 5 link plug fitted nap 150 link plugs removed nap 150 note Do not connect the nait 5 to mains power. + power switch mains input - - speakers ch1, left + speakers ch2, right cable direction marker mains input power switch speakers mains input ch1, left power switch Interconnects 4-4 DIN speakers ch2, right cable direction marker note Do not connect the nait 5 to mains power.
power amplifiers nap 500 - power amplifiers nap 500 connection to na ps500 power supply nap 135 + na ps500 + - - + 1 2 2 1 speakers ch1, left to power supply mains input fan Socket 1 ch1 -ve to preamp power supply. ch 1, left speakers ch1, left speakers ch2, right - to preamp power supply.
power amplifiers + - - + + nap 180 - - + to preamplifier or power supply nap 150 zone 1 zone 2 zone 3 speakers speakers speakers ch 1, left ch 1, left ch 1, left nap 250 mains input ch1 speakers ch1, left speakers ch2, right to power supply mains input speakers ch1, left speakers ch2, right nap 140 -ve ch2 +ve ch1 + - - ch1 nc + - + + - + + - + + nap 180 napv 175 Skt 1 -ve ch2 mains input power switch ch1 speakers ch1, left speakers ch1, left mains input speakers ch2,
power supplies flatcap 2 6 2 power supplies supercap hi-cap 3 1 mains input note supercap socket 6 for nac 52 only supercap socket 7 for nac 52 and snaxo only 2 3 +ve ch1 -ve 2 3 4 5 6 mains input power switch +ve nc -ve +ve nc 4 Sockets 1 & 5 supercap Sockets 3, 4, & 5 mains input ch1 nc ch2 -ve 1 7 supercap Socket 2 ch2 1 ch1 nc ch2 5 supercap Socket 1 +ve hi-cap Sockets 1, 2 & 3 4 +ve +ve ch2 ch1 -ve hi-cap Socket 4 -ve +ve ch1 -ve +ve note socket group 1, 2 3 &
power supplies nac 52 connection to supercap with second supercap for snaxo nac 52 nac 52 supercap supercap hi-cap supercap cable mains input mains input mains input mains input cable direction marker direction Interconnects 16 -16 Burndy 34 power supplies nac 52 connection to supercap with optional extra hi-cap for snaxo to snaxo marker Interconnects to snaxo 16 -16 Burndy 5-5 240˚ DIN 5-5 240˚ DIN 4-4 DIN 4-4 DIN 35
power supplies nac 82 nac 82 connection to supercap with extra hi-cap for snaxo all link plugs removed supercap flatcap 2 hi-cap napsc napsc mains input cable direction marker Interconnects 36 nac 82 all link plugs removed hi-cap mains input power switch to snaxo for cd5, headline or stageline. Additional interconnects required.
power supplies nac 82 nac 112 connection to flatcap 2 with extra flatcap 2 for snaxo, cd5, stageline or headline nac 112 all link plugs removed cover fitted supercap flatcap 2 supercap napsc cable power switch mains input mains input direction marker mains input to snaxo power switch mains input to snaxo for cd5, headline or stageline. Additional interconnects required.
active crossovers ixo 2 supercap 2-4 snaxo 2-4 o/p1 nc -ve 5-7 o/p1 nc o/p2 snaxo 1 -ve -ve 3-6/2-4 socket 1 mains input +ve ch1 -ve +ve 2-4 sockets 2 & 3 ch2 2-3 -ve nc o/p1 4-5 ixo sockets 1 & 2 to nac 52 2-4 sockets 4 & 5 o/p2 nc o/p1 1 -ve -ve o/p1 -ve hi-cap o/p2 nc mains input cable direction mains input power switch marker ixo socket 3 ch2 -ve 40 note connections for the snaxo 3-6 and snaxo 2-4 are the same.
active crossovers snaxo connection to hi-cap from nac 82, 102, 112 and hi-cap supercap hi-cap supercap hi-cap snaxo snaxo mains input to nac 52 mains input hi-caps earlier than serial number 105469 must be connected together via the second set of sockets rather than the third - as illustrated by the dotted connection cable.
active crossovers snaxo connection to supercap from nac 82 and supercap supercap supercap hi-cap supercap snaxo snaxo mains input mains input to nac 82 mains input mains input cable cable direction direction marker marker Interconnects Interconnects 4-4 DIN 5-5 240˚ DIN 44 to nac 82 active crossovers snaxo connection to hi-cap from nac 82 and supercap 4-4 DIN link plug fitted link plug removed 17 -17 Burndy 45
active crossovers nap 500 nap 500 snaxo 3-6 nap 500 + - ch1 bass green - + + - - + active crossovers snaxo 3-6 connection to three nap 500 ch1 mid red ch2 bass green ch2 mid red ch2 treble red ch1 treble green + - - + Interconnects 4 DIN/XLR Red 4 DIN/XLR Green 46 47
active crossovers nap 500 nap 500 snaxo 2-4 + - ch1 bass green - + + - - + active crossovers sanxo 2-4 connection to two nap 500 ch1 treble red ch2 bass green ch2 treble red Interconnects 4 DIN/XLR Red 4 DIN/XLR Green 48 49
active crossovers nap 135 nap 135 nap 135 ch1 bass green nap 135 snaxo 3-6 - + ch1 mid red mains input nap 135 nap 135 mains input - + - + - + ch2 mid red ch2 bass green mains input mains input - + ch1 treble green mains input + active crossovers snaxo 3-6 connection to six nap 135 ch2 treble red mains input Interconnects 4 DIN/XLR Red 4 DIN/XLR Green 50 51
active crossovers nap 135 nap 135 nap 135 - + ch1 treble red snaxo 2-4 mains input + - + nap 135 mains input - + ch2 treble red mains input ch1 bass green active crossovers snaxo 2-4 connection to four nap 135 ch2 bass green mains input Interconnects 4 DIN/XLR Red 4 DIN/XLR Green 52 53
active crossovers snaxo 3-6 snaxo 2-4 nap 250 nap 250 nap 250 nap 250 nap 250 + - ch1 bass - + ch1 mid + + + ch2 bass - + - + ch2 mid + - - + ch1 treble ch2 treble 54 + mains input mains input mains input Interconnects - ch1 bass ch1 treble mains input 4 DIN/XLR White - active crossovers snaxo 2-4 connection to two nap 250 snaxo 3-6 connection to three nap 250 + - - + ch2 bass ch2 treble Interconnects 4 DIN/XLR White 55
active crossovers ixo 2 connection to two nap 150 nac 112 ixo 2 cover fitted flatcap 2 left right ixo 2 nap 150 nap 150 power switch mains input + - - active crossovers nac 112 connection to flatcap 2 and ixo 2 + ch1 bass ch1 treble power switch mains input power switch mains input cable direction for cd5, headline or stageline. Additional interconnects required.
OWNCG Naim Audio Southampton Road Salisbury England SP1 2LN Tel: +44 (0)1722 332266 www.naim-audio.