Owner’s Manual UIM-2X XLR to USB Interface with 1/4” Adapter
Contents Quick User Controls Guide...................................................................... 2 Getting Started........................................................................................ 4 Headphone Output for Direct Monitoring............................................... 4 Assigning UIM-2X to a Computer........................................................... 4 Specifications..........................................................................................
1 10 NADY UIM-2X USB INTERFACE BLUE MIC GREEN LINE 2 R EC 3 PLAY 4 5 7 8 6 9 3
Getting Started Connect microphone to XLR Input (1). If using UIM-2X with a ¼” jack, connect the supplied ¼” Adapter (10). Connect UIM-2X to a powered USB port using supplied USB Cable (9). Press Input Level Selector (3) according to what is being connected to computer. Blue LED for XLR (Mic) and Green LED for ¼” (Line). 5. If using a condenser microphone that requires phantom power, press 48V Phantom Power Selector (5). 1. 2. 3. 4.
Specifications Frequency Response 20Hz to 20,000Hz Power requirements USB powered Sampling Rate Up to 48KHz Bit Depth 16 bit 1/8” (3.5mm) Headphone Output Input XLR or 1/4” LED Color Indicators Input: Blue = Mic Green = Line Rec/Play: Left = Record Right = Play 48V: Phantom power selector Troubleshooting Problem Solution No indicator lights Verify USB port is 1.1 or 2.
System Requirements USB USB 1.1 or 2.0, powered RAM 64MB minimum Operating System Windows XP or later, Mac OS X 10.1 or later Accessories • USB cable (18” and 6.25 ft.) • ¼” line level to XLR adapter Service Information In the U.S. If you are experiencing operational problems with your system, please refer to the Support page at www.nady.com for assistance.
One-Year Limited Warranty Nady Systems, Inc. warrants to the original consumer purchaser that the unit is free from any defects in material or workmanship for a period of one year from the date of original retail purchase. If any such defect is discovered within the warranty period, Nady Systems, Inc. will repair or replace the unit free of charge, subject to verification of the defect or malfunction upon return to Nady Systems.
6701 Shellmound Street | Emeryville, CA USA 94608 T 510.652.2411 | F 510.652.5075 | www.nady.
