User Manual

DW-11 and DW-22 Receiver Front and Back Label

6. LED Display

The DW-11/DW-22 receivers are equipped with AF LED indicator (4) showing the

audio present from the transmitter. If this LED lights continuously, decrease the volume

to the Mic or overload distortion may result. The RF LED DISPLAY (3) showing the

TRANSMITTERS(TX) is on. When it is lit up, the TX is in usable range. If not lit up or

ickering, either the TX is not on or it is out of range. Move the TX closer to re-establish

the connection.

1. Power On Indicator 2. Power On/Off Switch 3. RF On Indicator

4. AF On Indicator 5. Frequency Label Screen 6. Volume Control

7. Balanced XLR Out 8. Unbalanced ¼” LINE/MIX Out 9. DC Input Jack

10. Antenna