PORTABLE SYSTEM OWNER’S MANUAL RPA-6 6 CHANNEL PORTABLE SOUND SYSTEM
RPA-6 6 CHANNEL PORTABLE SOUND SYSTEM Congratulations on your choice of the NADY AUDIO RPA-6 Portable Sound System — you have purchased one of the finest portable sound systems on the market today. This unit was developed using the expertise of professional sound engineers and working musicians. You will find that your new NADY AUDIO RPA-6 has superior performance and greater flexibility than any other portable sound systems in its price range.
WARNING An equilateral triangle enclosing a lightening flash/arrowhead symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure which may be of sufficient magnitude to constitute a risk of electric shock. ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR An equilateral triangle enclosing an exclamation point is intended to alert the user to the presence of important operating and service instructions in the literature enclosed with this unit.
INSTALLATION To ensure years of enjoyment from your NADY AUDIO RPA-6, please read and understand this manual thoroughly before using the unit. INSPECTION Your RPA-6 was carefully packed at the factory in packaging designed to protect the units in shipment. Before installing and using your unit, carefully examine the packaging and all contents for any signs of physical damage that may have occurred in transit. (Note: Nady Systems is not responsible for shipping damage.
FRONT PANEL CONTROLS & CONNECTIONS FRONT PANEL Note: 1 through 6 below are referenced to Channel 1. The other 5 channels are identical. (2) (1) (3) (1) GAIN CONTROL The Gain Control determines the proportion of the channel signal in the mix, (4) (2) REVERB CONTROL The Reverb Control adjusts the level of signal sent by each channel to the internal Reverb DSP (Digital Sound Processor). The signal sent is mono, post-High/Low and will be affected by the channel Gain Control.
FRONT PANEL CONTROLS & CONNECTIONS (14) (15) (16) (9) MASTER — DEPTH CONTROL This controls the amount of feedback of the reverb reflection, i.e. the number of reflections and the length of time before they diminish in volume. (10) POWER ON LED INDICATOR Indicates when the unit is ON. (11) MASTER — HIGH CONTROL The control has a shelving response giving 15dB of boost or cut at 10KHz.
SPECIFICATIONS AMPLIFIER AND SPEAKER Power ............................................................................................................................................................................130W RMS @ 4 Ω S/N Ratio ........................................................................................................................................................................................ >115dB THD Power output, 20Hz to 20KHz ................................................
SERVICE FOR YOUR NADY AUDIO PRODUCT (U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411, or e-mail at service@nady.com. (International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased this product. DO NOT ATTEMPT TO SERVICE THIS UNIT YOURSELF AS IT CAN BE DANGEROUS AND WILL ALSO VOID THE WARRANTY. NADY SYSTEMS, INC.
