POWERED MIXER OWNER’S MANUAL MPM 8175 8 CHANNEL POWERED MIXER
MPM 8175 8 CHANNEL POWERED MIXER Congratulations on your choice of a powered mixer — you have purchased one of the finest powered mixers on the market today. This unit was developed using the expertise of professional sound engineers and working musicians. You will find that your new NADY AUDIO MPM 8175 has superior performance and greater flexibility than any other powered mixers in its price range. Please read this manual carefully to get the most out of your new unit.
WARNING IMPORTANT SAFETY INSTRUCTIONS When using this electronic device, basic precautions should always be taken, including the following: 1. Read all instructions before using the product. 2. Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, in a wet basement, or near a swimming pool, etc.). 3. 4. This product should be used only with a cart or stand that will keep it level and stable and prevent wobbling.
INSTALLATION To ensure years of enjoyment from your NADY AUDIO MPM 8175, please read and understand this manual thoroughly before using the unit. INSPECTION Your MPM 8175 was carefully packed at the factory in packaging designed to protect the units in shipment. Before installing and using your unit, carefully examine the packaging and all contents for any signs of physical damage that may have occurred in transit. (Note: Nady Systems is not responsible for shipping damage.
FRONT CONNECTIONS (3) (9) (5) (8) (2) (6b) (1) (6c) (7) (6) (6a) (4) FRONT PANEL Note: 1 through 5 below are referenced to Channel 1. The other 7 Channels are identical. digital delay will feed to the master output. There are three knobs here to control the effect of the delay. (6a) SWITCH This push button switches the delay effect ON/OFF. (6b) LEVEL This knob adjusts the mix level of the effect sound.
REAR CONNECTIONS (11) (14) (12) (15) (10) (13) REAR PANEL (10) TAPE IN AND TAPE OUT The TAPE IN allows cassette recorders or CD players to be added to the Main output. The RECORD OUTPUT, with TAPE RCA jacks, provides signal output to a cassette deck or Home audio equipment. The nominal output level and impedance are 10dBV/600 ohms. harm the unit. Damage caused by overloading is not covered by the warranty.
APPLICATIONS SPEAKERS FRONT OF HOUSE SPEAKERS DVD/CD PLAYER AUDIO CASSETTE VOCAL MIC Guitar MIC LEVEL SOURCES KEYBOARD,SYNTHESIZER,SAMPLER 8
APPLICATIONS AUDIO CASSETTE 9
SPECIFICATIONS POWER AMP OUTPUT 8Ω Total Impedance.................................. 4Ω Total Impedance.................................. 100W RMS 175W RMS INPUTS XLR balanced mic level ............................................. 1/4” TRS balanced/unbalanced mic/line level ............ RCA Tape Input ......................................................... 8 8 2 CHANNELS Level .................................................... Effect ................................................... Low EQ ......
SERVICE FOR YOUR NADY AUDIO PRODUCT (U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411, or e-mail at service@nady.com. (International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased this product. DO NOT ATTEMPT TO SERVICE THIS UNIT YOURSELF AS IT CAN BE DANGEROUS AND WILL ALSO VOID THE WARRANTY. NADY SYSTEMS, INC.
