CROSSOVER CX-23SW 3-WAY STEREO PLUS SUBWOOFER OWNER’S MANUAL
CX-23SW 3-WAY STEREO+SUBWOOFER CROSSOVER Congratulation! You have just purchased one of the finest professional crossovers on the market today. This unit was developed using the expertise of professional sound engineers and working musicians. You will find your new NADY AUDIO crossover has superior performance and greater flexibility than any other crossover in its price range. Date of Purchase Dealer’s Name City State Zip Read this manual carefully to get the most out of your new unit.
Warning An equilateral triangle enclosing a lightning flash/arrowhead symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure which may be of sufficient magnitude to constitute a risk of electric shock. ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR An equilateral triangle enclosing an exclamation point is intended to alert the user to the presence of important operating and service instructions in the literature enclosed with this unit.
Controls and Connections 8 7 2 4 5 3 9 R CHANNEL 6 SUB 1 L CHANNEL CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION: SHOCK HAZARD - DO NOT OPEN RISQUE DE CHOC ELECTRIQUE NE PAS QUVRIR. NADY SYSTEMS, Inc. Emeryville, CA, USA Made in Taiwan 115V~/60Hz 230V~/50Hz FUSE 0.5A/250V HIGH MID LOW OUTPUT 10 15 14 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.
Typical Set-up SUBWOOFER RIGHT RIGHT LEFT HIGH AMP VOL RIGHT LEFT MID AMP VOL VOL LEFT LOW AMP VOL VOL R CHANNEL SUBWOOFER AMP VOL VOL SUB L CHANNEL CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION: SHOCK HAZARD - DO NOT OPEN RISQUE DE CHOC ELECTRIQUE NE PAS QUVRIR. NADY SYSTEMS, Inc. Emeryville, CA, USA 115V~/60Hz 230V~/50Hz Made in Taiwan FUSE 0.
Specifications Crossover Type: Stereo 3 ways + Subwoofer Crossover Frequencies Subwoofer: LM: MH: 50 - 250Hz 70 – 1000Hz 480 – 7000Hz Filter Type (Slope): 2nd order, 12dB/Octave Inputs Type: Impedance: Balanced XLR 100 Kohms Outputs Type: Impedance: Balanced XLR 220 Ohms Low Cut Filters: 30Hz/ - 3dB, 12dB/Octave Frequency Response: 25Hz - 25KHz +/-1dB Total Harmonic Distortion (THD) + Noise : < 0.05 % S/N Ratio: > 80 dB Fuse: 0.5 A/ 250V, 5x20mm glass type Dimensions: 19’’ x 1.
SERVICE FOR YOUR NADY AUDIO PRODUCT (U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411 or E-mail at service@nadywireless.com. (International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased this product. DO NOT ATTEMPT TO SERVICE THIS UNIT YOURSELF AS IT CAN BE DANGEROUS AND ALSO WILL VOID THE WARRANTY. NADY SYSTEMS, INC.
