CROSSOVER CX-22SW 2-WAY STEREO PLUS SUBWOOFER OWNER’S MANUAL
CX-22SW 2-WAY STEREO+SUBWOOFER CROSSOVER Congratulation! You have just purchased one of the finest professional crossovers on the market today. This unit was developed using the expertise of professional sound engineers and working musicians. You will find your new NADY AUDIO crossover has superior performance and greater flexibility than any other crossover in its price range. Date of Purchase Dealer’s Name City State Zip Read this manual carefully to get the most out of your new unit.
Warning An equilateral triangle enclosing a lightning flash/arrowhead symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure which may be of sufficient magnitude to constitute a risk of electric shock. ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR An equilateral triangle enclosing an exclamation point is intended to alert the user to the presence of important operating and service instructions in the literature enclosed with this unit.
PLEASE READ THIS MANUAL BEFORE OPERATING THIS UNIT Caution : To prevent malfunctioning and/or possible equipment damage: Before plugging the unit into the power source: (1) the voltage selector switch should be set for the correct voltage for your area (115V or 230V) and (2) all equipment connected to the crossover outputs should be turned off or all the inputs turned down.
. 6. 7. 8. PHASE SWITCHES: These allow switching the polarity to invert the signal phase on the HIGH ways. This is done after the output levels are set to correct audible phase problems. Caution: Before pressing the PHASE switches, always lower the outputs of your power amplifiers to avoid possible speaker damage. SUB CROSSOVER FREQUENCY CONTROL: This selects the crossover frequency of the SUB WOOFER way. You can select the frequency between 50 Hz to 250 Hz.
TYPICAL SET-UP XLR BALANCED PIN 1 GND PIN 2 HI PIN 3 LO RCA UNBAL 115V/60Hz 230V/50Hz R CHANNEL L CHANNEL SUB NADY SYSTEMS, Inc. Emeryville, CA, USA Made in Taiwan AC IN FUSE 0.
SERVICE FOR YOUR NADY AUDIO PRODUCT (U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411 or E-mail at service@nadywireless.com. (International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased this product. DO NOT ATTEMPT TO SERVICE THIS UNIT YOURSELF AS IT CAN BE DANGEROUS AND ALSO WILL VOID THE WARRANTY. NADY SYSTEMS, INC.
