User's Manual

ⅰ Handheld transmitter positive map
●
1 Microphone Head:Includes Microphone grille and microphone capsule.
●
2 Tube body: Containing batteries 、 transmitter PCB, built-in
function keys, built-in transmitting antenna tail.
●
3 LCD screen:display Group、Channels and battery.
●
4 Up and down select keys (built-in): Press "▲" "▼" button to select
the menu on the current state of change, can change the Working Group
or Channel.( use same as the receiver)
●
5 Settings button (the built-in): Press "SET" key to select
the main menu cycle, also can change the settings to confirm.
Change the settings if confirmed, LCD screen will be
flashing to remind, after 9 seconds flashing to stop, change
the entry into force.
●
6 Built-in high and low transmission power change-over switch
●
7 Power switch: On/OFF
ⅱ Handheld transmitter back of map
●
8 Infrared auto frequency window,by operating “SET” button of receiver,channel
parameters shall be sent to transmitter.
●
9 Battery Tray