User Guide

Bur3069-2D Set Up Steps
Step 1. Scan the following setting codes in order.
Step 2. Scan setting code "one to one" , the scanner will go to pairing mode
and beep continuously. Then plug the cradle to USB port. If the scanner has
one "beep"sound in 3s , that means the pairing is succeed.
Step 3. Scan code "instantly upload mode".
Step 4: Run notepad on computer, put the cursor in the blank, scan a barcode
to see if the barcode comes up.
Tech support: [e-mail], [e-mail]
Restore Default 1
Restore Default 2
One to One
Note: if the pairing fails, please unplug the cradle and repeat step 2
Instantly upload mode