User Guide 第 1 页 共 72 页
About This User Guide Pls read all the content of the user guide carefully to use the products safely and effectively. You are advised of keeping it properly for your using reference for the next query. Disclaimer Please do not dismantle the product or tear up the seal on it, otherwise we won’t provide warranty or replacement service. The pictures in this user guide are for reference only. If there are any pictures which not match the actual product, please take actual products as the standard.
Version record Manual Version number Version description publication date SV1.0 ZS_27 1.
Catalog 1.Product Introduction................................................................................................................................................. 9 1.1 Main feature....................................................................................................................................................9 1.2 Unpack your device.......................................................................................................................................9 1.
2.3.2 Start-up beep.................................................................................................................................... 21 2.3.3 Good read beep............................................................................................................................... 21 2.3.4 Beep pitch-good read...................................................................................................................... 22 2.3.5 Beep duration-good read.............................
2.9.14 Industrial 2 of 5 (Industrial 25code)（4-24bit）........................................................................33 2.9.15 Industrial 2 of 5 Limitation of length............................................................................................33 2.9.16 Matrix 2 of 5 (matrix 25 code)（4-24 bit）................................................................................ 33 2.9.17 Matrix 2 of 5 Limitation of length........................................................................
2.9.38 UPC-A..............................................................................................................................................39 2.9.39 UPC-A check bit.............................................................................................................................39 2.9.40UPC-A to EAN-13........................................................................................................................... 40 2.9.41 UPC-E.............................................
Appendix...................................................................................................................................................................... 48 Appendix 1 Data and edit barcode..................................................................................................................48 Appendix 3 Invisible character ASCII table....................................................................................................
1.Product Introduction This user guide applies toEP3000Y,EP5000Y,EP6000Y,EP7000Y,EP8000Y ,which identify 1D&2D barcodes by 2D image scanning pattern, and apply the complete set of patent technology developed by Guangzhou YOKO Electron Co., Ltd. The scanners above are of strong identification capability, and support automatic continuous scanning mode with fast and flexible scanning speed.
intelligent terminal with USB or RS-232 interface. USB RS-232 USB interface on host RS-232 interface on host 1.4 Start-up, shutdown, standby and restart Start-up：Connect host computer with scanner, which will automatically start-up and in working state. Shutdown：Remove the data cable which is connected with scanner; remove the USB which is connected with host computer; remove the power adapter which is inserted into RS-232 serial port.
the barcode at an angle to successfully scan it.
2. Barcode setting This model of laser desktop barcode scanner is designed to change settings by reading some special barcode, which we will give you a detailed introduction and show you all the barcodes for the corresponding setting in this section. The greatest advantage of this setting method is direct, intelligible and user friendly. 2.1 Mark Setting 1 Configuration code turn on (default) 2 This is the identification of the scan code function to turn on (default) bar code function.
Configuration code turn off 2.2.2 Restore factory default Restore factory default 2.2.3 Read version number Version number 2.2.4 Product user configuration Scan the barcode below to save the current parameters of the product as a user configuration. Save user configuration Scan the barcode below restores the product to a saved user configuration. Restore user configuration 2.2.
Upload the upper computer and notepad simultaneously 2.2.6 Interface mode setting The scanning platform supports the interface mode of USB keyboard, USB to serial port and serial port. Scan the barcode below to configure it as a USB PC keyboard and USB MAC keyboard mode. USB keyboard USB MAC keyboard(Disable) Host mode (command decoding + physical serial port) Do not scan this barcode in USB mode Scan the barcode below to configure the scanner to serial mode.
Device ID settings USB upgrade 2.2.7 Serial port setting 2.2.7.
2.2.6.
8-bit data, 1-bit stop,even parity 8-bit data, 1-bit stop,odd parity 8-bit data, 2-bit stop,no parity 8-bit data, 2-bit stop,even parity 8-bit data, 2-bit stop,odd parity 2.2.
Lighting often turn on 2.2.9 Control character escape Turn on control character escape Turn off control character escape(default) 2.2.
Replace with (not enabled) 2.2.11 Prefix setting Cancel prefix (default) 2.2.12 Suffix setting Cancel suffix (def ault ) <\t> 第 19 页 共 72 页
式 2.2.13 Unicode Output Mode In order to correctly output according to the specified encoding format, the output encoding format needs to be specified,for example, simplified Chinese is configured as GBK encoding in notepad /excel output, and UNICODE encoding in Word output. When the output encoding format is configured as English/latin-1 encoding, the output mode under USB keyboard is affected by the switch of virtual keyboard function.
Enable virtual keyboard（mode 1） Enable virtual keyboard（mode 2） Enable virtual keyboard（mode 3） 2.3 Buzzer , LED indicator barcode and vibration prompt setting barcode 2.3.1 Beeper Volume setting Low volume High volume(default) 2.3.2 Start-up beep Shut dow n star t- up beep Open st art -up beep （ def ault ） 2.3.
good read beep off （ def ault ） 2.3.4 Beep pitch-good read Low pitch (default） Middle pit ch High pit ch 2.3.5 Beep duration-good read Tone long （ def ault ） Tone pip 2.3.6 Error sound You will hear 4 continue alar m sounds when dat a upload failure, one single alar m sound means scan indist inguishableness bar code.
er ror sound high pit ch 2.3.7 Good-read LED Good-r ead LE D off Good-r ead LE D on （ def ault ） 2.4 Timeout between decodes (Same barcodes)（Self-induction mode） 2.4.1 Timeout between same decode Used to configure the interval time for solving the same barcode. If the setting time is not exceeded, the same barcode will be solved only once.
2.4.2 Reading time Single reading time In the inductive reading mode, this parameter refers to the maximum length of time that the reading engine is allowed to continue to collect and recognize before the reading is successful. After a successful reading or a single reading timeout, the reading engine will enter an interval that does not capture the reading. The single reading time setting range is 0.1~25 seconds and the step size is 0.1 second. Indicates that the reading time is infinitely long.
2.6 OA & LF setting（USB keyboard） Only 0A(LF) line feed Only 0D(CR)line feed (default) Both 0A(LR) and 0D(CR) line feed 2.7 USB keyboard text-transform Normal output (default) Case reversal All Caps All lowercase 2.
Italian (Italy) (Italy)（Not Enabled） German (Germany) Spanish (Spain) Spanish (Latin America)（Not Enabled） Finnish（Not Enabled） Japanese（Not Enabled） Russian (MS)（Not Enabled） 第 26 页 共 72 页
Russian (typewriter)（Not Enabled） Arabic (101)（Not Enabled） Irish（Not Enabled） Polish (214)（Not Enabled） Polish (Programmers)（Not Enabled） Dutch (Netherlands)（Not Enabled） Czech (QWERTZ)（Not Enabled） Portuguese (Portugal)（Not Enabled） Portuguese (Brazil)（Not Enabled） 第 27 页 共 72 页
Swedish (Sweden）（Not Enabled） Q Turkish Q Turkish F（Not Enabled） Greek (MS)（Not Enabled） French (Belgium) English (UK) 2.9 Symbologies 2.9.1 enable/disable all symbologies Enable all bar code might slow dow n scanner dec ode speed. We sugges t enable the bar code you need bas ed on your scene. Enable all bar code is def ault . Enable all sy mbologies ( def ault ) Disable all symbologies 2.9.
Disable Codabar 2.9.3 Codabar start/ending character setting Don’t send Codabar start/ending character (default) Send Codabar start/ending character 2.9.4 Codabar limitation of length Codabar min length（1~127bit） Codabar max length（1~127bit） 2.9.5 Code 39 Enable Code 39 Disable Code 39 2.9.
Enable Code 39 check send check bit 2.9.7 Code 39 Full ASCII Enable Full ASCII Disable Full ASCII (default) 2.9.8 Code 39 limitation of length Code 39 max length (1~127bit) Code 39 min length (1~127bit) 2.9.
2.9.10 Interleaved 2 of 5 （ITF5） Enable ITF25 Disable ITF25 2.9.11 Interleaved 2 of 5 （ITF5）check bit Disable ITF25 check (default) Enable ITF25 check don’t send check bit Enable ITF25 check send check bit 2.9.
ITF25 8 bit length ITF25 10 bit length ITF25 12 bit length ITF25 14 bit length ITF25 16 bit length ITF25 18 bit length ITF25 20 bit length ITF25 22 bit length ITF25 24bit length 2.9.
Interleaved 2 of 5 min limitation length （4~128 bit） Interleaved 2 of 5 max limitation length (4~128bit) 2.9.14 Industrial 2 of 5 (Industrial 25code)（4-24bit） Enable Industrial 2 of 5 Disable Industrial 2 of 5 2.9.15 Industrial 2 of 5 Limitation of length Industrial 2 of 5 min length (4~128bit) Industrial 2 of 5 max length (4~128bit) 2.9.16 Matrix 2 of 5 (matrix 25 code)（4-24 bit） Enable Matrix 2 of 5 Disable Matrix 2 of 5 2.9.
Matrix 2 of 5 min length (4~128 bit) Matrix 2 of 5max length (4~128bit) 2.9.18 Standard 25 Enable Standard 25 (default) Disable Standard 25 2.9.19 Standard 25Limitation of length Standard 25 min length（4~128 bit） Standard 25max length（4~128 bit） 2.9.
2.9.21 Code 93 Enable Code 93 Disable Code 93 2.9.22 Code 93 Limitation of length Code 93 min length（1~127 bit） Code 93 max length（1~127bit） 2.9.23 Code 11（Not Enabled） Enable Code 11 Disable Code 11 (default) 2.9.24 Code 11 check bit output（Not Enabled） Enable Code 11check bit output Disable Code 11check bit output 2.9.
Disable Code 11check bit (default) Code 11 Code 11 one check bit two check bit 2.9.26 Code 11 Limitation of length（Not Enabled） Code 11 min length（1~127 bit） Code 11 max length（1~127bit） 2.9.27 Code 128 Enable Code 128 Disable Code 128 2.9.
Code 128 max length (1~127 bit) 2.9.29 GS1-128(requires CODE 128 to be enable） Enable GS1-128 Disable GS1-128 2.9.30 ISBT-128 Disable ISBT 128 2.9.31 Plessey Enable ISBT 128 Enable Plessey (default) Disable Plessey 2.9.
2.9.33 Plessey check bit optional Plessey don’t check Plessey check anf send check bit Plessey check don’t send check bit (default) 2.9.34 MSI plessey Enable MSI plessey (default) Disable MSI plessey 2.9.35 MSI plessey Limitation of length MSI plessey min length （1~127 bit） MSI plessey max length （1~127bit） 2.9.
MSI plessey check bit don’t output (default) 2.9.37 MSI plessey Check mode selection setting MSI plessey don’t check MSI plessey one check bit MOD10 (default) MSI plessey two check bit MOD10/MOD10 MSI plessey two check bit MOD10/MOD11 2.9.38 UPC-A Enable UPC-A Disable UPC-A 2.9.
don’t send UPC-A check bit 2.9.40UPC-A to EAN-13 Enable UPC-A toEAN-13 Disable UPC-A to EAN-13 (default) 2.9.41 UPC-E Enable UPC-E Disable UPC-E 2.9.42 UPC-E check bit Send UPC-E check bit (default) Don’t send UPC-E check bit 2.9.
Disable UPC-E expand UPC-A (default) 2.9.44 EAN/JAN-8 Enable EAN/JAN-8 Disable EAN/JAN-8 2.9.45 EAN/JAN-13 Enable EAN/JAN-13 Disable EAN/JAN-13 2.9.
2.9.47 EAN13 to ISBN Enable EAN13 to ISBN Disable EAN13 to ISBN (default) 2.9.48 EAN13 to ISSN Enable EAN13 to ISSN Disable EAN13 to ISSN(default) 2.9.49 GS1 DataBar（RSS14）(Stacked) Enable GS1 DataBar Disable GS1 DataBar 2.9.50 GS1 DataBar（RSS14）(Stacked) AI（01）character send Send AI（01）character (default) Don’t send AI（01）character 2.9.
Enable GS1 DataBar Limited Disable GS1 DataBar Limited 2.9.52 GS1 DataBar Limited AI（01）character send Send AI（01）character (default) Don’t send AI（01）character 2.9.53 GS1 DataBar Expanded Enable GS1 DataBar Expanded Disable GS1 DataBar Expanded 2.9.54 PDF417 Enable PDF417 Disable PDF417 2.9.
2.9.56 QR Code Enable QR Disable QR 2.9.57 Micro QR Enable Micro QR Disnable Micro QR 2.9.58 Data Matrix Enable Data Matrix Disable Data Matrix 2.9.
2.10 User-defined prefix setting Output Enable user-defined prefix output Disable user-defined prefix output (default) Edit Clear all user-defined prefix User-defined prefix (Please follow the barcode type ID table and data and edit barcode in the appendix after scanning) 2.
Clear all user-defined suffixes user-defined suffix (Please follow the barcode type ID table and data and edit barcode in the appendix after scanning) 2.12 Barcode prefix&suffix order selection Prefix (default) Suffix (default) 2.
Enable CODE ID former barcode Disable CODE ID latter barcode Edit user-defined CODE ID (Please follow the barcode type ID table and data and edit barcode in the appendix after scanning) Clear all user-defined CODE ID 2.
Appendix Appendix 1 Data and edit barcode 0 1 2 3 4 5 6 第 48 页 共 72 页
7 8 9 A B C D E F 第 49 页 共 72 页 Cancel a string of data read before
Cancel current setting Save Cancel a string of data read before Barcode type Appendix 2 Barcode type ID table HEX All code system 99 Codabar 61 a Code128 6A j ISBT-128 6A j Code32 3C < Code93 69 i Code39 62 b Code11 48 H Plessey 70 p MSI plessey 6D m EAN-13 64 d EAN-8 64 d 52 R GS1 DataBar（RSS14） (Stacked) 第 50 页 共 72 页 CODE ID(default)
GS1 DataBar Limited 52 R GS1 DataBar Expanded 52 R GS1-128 (EAN-128) 6A j Interleaved 2 of 5 65 e Matrix 2 of 5 76 v Industry 2 of 5 44 D Stamdard 25 73 s UPC-A 63 c UPC-E 63 c ISBN 42 B ISSN 6E n DataMatrix 75 u PDF417 72 r Micro PDF417 53 s QR Code 51 Q Micro QR Code 51 Q 2 of 5 第 51 页 共 72 页
Barcode type AIM ID Description Codabar ]Fm m：0~1 Code128 ]C0 m：0，1，2，4 ISBT-128 ]C4 Code32 ]A0 Code93 ]G0 Code39 ]Am m：0，1，3，4，5，7 Code11 ]Hm m：0，1，3，8，9 Plessey ]P0 MSI plessey ]Mm m：0，1，7，8，9 EAN-13 ]Em m：0，1，3，4 EAN-8 ]Em m：0，1，3，4 All code system GS1 DataBar(RSS14） (Stacked) ]e0 GS1 DataBar Limited ]em GS1 DataBar Expanded ]em GS1-128 (EAN-128) ]C1 2 of 5 Interleaved 2 of 5 ]Im Matrix 2 of 5 ]X0 Industry 2 of 5 ]S0 Stamdard 25 ]Rm m：0，8，9 UPC-A ]Em m：
Micro PDF417 ]Lm m: 0~5 QR Code ]Qm m: 0~6 Micro QR Code ]Qm m: 0~6 第 53 页 共 72 页
Appendix 3 Invisible character ASCII table 10 hex Hex Corresponding character 0 00 NUL 1 01 SOH 2 02 STX 3 03 ETX 4 04 EOT 5 05 ENQ 6 06 ACK 7 07 BEL 8 08 BS 9 09 HT 10 0A LF 11 0B VT 12 0C FF 13 0D CR 14 0E SO 15 0F SI 16 10 DLE 17 11 DC1 18 12 DC2 19 13 DC3 20 14 DC4 21 15 NAK 22 16 SYN 23 17 ETB 24 18 CAN 25 19 EM 第 54 页 共 72 页
26 1A SUB 27 1B ESC 28 1C FS 29 1D GS 30 1E RS 31 1F US 第 55 页 共 72 页
Appendix 4 Visible character ASCII table Hexadecim 10 hex al Character 10 hex Hexadeci Chara mal cter Hexadecim Charact 10 hex al er 32 20 64 40 @ 96 60 ` 33 21 ! 65 41 A 97 61 a 34 22 “ 66 42 B 98 62 b 35 23 # 67 43 C 99 63 c 36 24 $ 68 44 D 100 64 d 37 25 % 69 45 E 101 65 e 38 26 & 70 46 F 102 66 f 39 27 ‘ 71 47 G 103 67 g 40 28 ( 72 48 H 104 68 h 41 29 ) 73 49 I 105 69 i 42 2A * 74 4A J 106 6A j
56 38 8 88 58 X 120 78 x 57 39 9 89 59 Y 121 79 y 58 3A : 90 5A Z 122 7A z 59 3B ; 91 5B [ 123 7B { 60 3C < 92 5C \ 124 7C | 61 3D = 93 5D ] 125 7D } 62 3E > 94 5E ^ 126 7E ~ 63 3F ? 95 5F _ 第 57 页 共 72 页
Appendix 5 Default setting table Parameter name Default setting Remarks Communication settings TTL-232 （default） Serial port baud rate 9600 Serial check bit No check bit Serial data bit 8 bit Serial port stop 1 bit Host mode OFF USB Keyboard layout American keyboard Barcode content contains carriage 0D only (enter enter character feed processing character CR) Tab （USB keyboard） USB Case conversion Not converting virtual keyboard Off USB keyboard sending speed Fast speed Control char
Aiming mode Normal mode Prompt output Power on tone on prompt on Beep type audio rate low Decoding success Beep volume tone Beep duration high long code read tone setting Allow Decoding success LED prompt On Data editing Prefix and suffix Prefix adding No add Prefix content No AIM ID No add Code ID No add Suffix adding No add Suffix content No End character adding Add End character content Parameter name 0x0A，0×0D Enter Default setting Remark Open Valid for all bar code Bar
symbol types Code 128 Reading Allow Max length 127 Min length 1 GS1-128（UCC/EAN-128） Reading Allow 127 Max length 1 Min length EAN-8 Reading Allow EAN-13 Reading Allow 2 bit extension code No reading 5 bit extension code No reading must have the extension code No require ISSN Reading Not allow ISBN Reading Not allow 第 60 页 共 72 页
UPC-E Reading allow Output check character Output Expand to UPC-A No expand UPC-A Reading allow Output check character Output UPC-A to EAN-13 Off Interleaved 2 of 5 Reading allow Check No check Max length 128 Min length 4 Matrix 2 of 5 Read Not allow Max length 128 Min length 4 Industrial 2 of 5 Reading allow Max length 128 第 61 页 共 72 页
Min length 4 Standard 2 of 5 Reading allow Check No check Output check character No output Max length 128 Min length 4 Code 39 Reading allow Check No check Output check character No output Support Full ASCII Support Max length 127 Min length 1 Code 32 Reading allow Codabar Reading allow Check No check Send start character and end character No output 第 62 页 共 72 页 Default (off)
Max length 127 Min length 1 Code 93 Reading allow Max length 127 Min length 1 GS1 Databar（RSS14）(Stacked) Reading allow send AI(01) character Send GS1 Databar Limited Reading allow Send AI(01) character Send GS1 Databar Expanded reading allow Code 11 reading allow Check bit Output Check bit option Off Max length 127 Min length 1 第 63 页 共 72 页 Off
Plessey reading Allow Check but don’t output Check bit Max length 127 Min length 1 MSI-Plessey Reading allow Output check Don’t output Check bit mode selection 1 bit MOD10 Max length 127 Min length 1 PDF417 Reading allow Max length 2710 Min length 1 Micro PDF417 Reading allow Max length 2710 Min length 1 QR Code Reading allow 第 64 页 共 72 页
Max length 7089 Min length 1 Micro QR Reading allow Max length 7089 Min length 1 Data Matrix Reading allow Max length 3116 Min length 1 第 65 页 共 72 页
Appendix 6 operational character (USB keyboard) 10 hex Hex Corresponding key value (disable CODE ID) Corresponding key value (enable CODE ID) 0 00 retain Ctrl+@ 1 01 Insert Ctrl+A 2 02 Home Ctrl+B 3 03 End Ctrl+C 4 04 Delete Ctrl+D 5 05 PageUp Ctrl+E 6 06 PageDown Ctrl+F 7 07 ESC Ctrl+G 8 08 Backspace Backspace 9 09 Tab Tab 10 0A 11 0B Caps Lock Ctrl+K 12 0C Print Screen Ctrl+L 13 0D 14 0E Scroll Lock Ctrl+N 15 0F Pause/Break Ctrl+O 16 10 F11
24 18 F3 Ctrl+X 25 19 F4 Ctrl+Y 26 1A F5 Ctrl+Z 27 1B F6 ESC 28 1C F7 Ctrl+\ 29 1D F8 Ctrl+] 30 1E F9 Ctrl+^ 31 1F F10 Ctrl+_ 第 67 页 共 72 页
Appendix 7 operational character (serial port and USB-VCOM) 10 hex Hex Corresponding character 0 00 NUL 1 01 SOH 2 02 STX 3 03 ETX 4 04 EOT 5 05 ENQ 6 06 ACK 7 07 BEL 8 08 BS 9 09 HT 10 0A LF 11 0B VT 12 0C FF 13 0D CR 14 0E SO 15 0F SI 16 10 DLE 17 11 DC1 18 12 DC2 19 13 DC3 20 14 DC4 21 15 NAK 22 16 SYN 23 17 ETB 24 18 CAN 25 19 EM 第 68 页 共 72 页
26 1A SUB 27 1B ESC 28 1C FS 29 1D GS 30 1E RS 31 1F US Some feature configuration instructions and examples Example of custom prefix and suffix configuration Configure the barcode pre/suffix by scan code. Each prefix or suffix character can be up to 10.(To ensure that custom suffixes can be output, configure the scanner's custom pre/post suffix output option to be turned on.) Example 1.1: Add a custom prefix XYZ to all types of barcode.
Scan the configuration code Customize The Prefix, then scan the appendix data and edit the 5, 1, 5, 2 in the barcode to save, that is, complete the configuration. Example 1.3：Cancel the custom prefix of the QR code When customizing prefixes and suffixes,behind the barcode type characters are saved without adding other characters,that is, clear the custom prefix and suffix for this type of barcode.
edit the 0 in the bar code, save,the configuration is completed. Scan configuration code Interleaved 2 of 5 maximum length limit,then scan the appendix data and edit the 1, 4 in the bar code, save,the configuration is completed.
第 72 页 共 72 页
