User Guide

1、Product Component Description
3、Data Cable Pull And Plug
2、Packing list
One scanner, one data cable, one instruction book, in line with
the principle of simplicity and ease of use, all settings barcodes of
products are not all placed in the instruction book. If you need a
detailed settings manual in the use process, please contact us.
Host USB Interface
Host RS-232 Interface
Terminal Communication Interface:
USB Data Cable Connection Diagram:
RS-232 Data Cable Connection Diagram：
1、Connect the RJ45 interface of the USB cable to the scanner ;
2、Connect the USB interface of the USB cable to the host.
1、Connect the RJ45 interface of the RS-232 cable to the scanner;
2、Connect the RS-232 interface of the RS-232 cable to the host;
3、Connect the RS-232 cable to power adapter.
Scan window
6、Inverse Code Option (Only 1D/ Data Matrix / Aztec)
Only Decode Normal Code
(Default)
Only Decode Inverse Code
Decode Both Normal Code And Inverse Code
4、Basic Settings
Note: restore the default settings can not change the interface settings of the
product. For example, when the product with interface setting USB status is
restored to the default setting, it is still set for USB interface and will not
change into other interface settings.
5、Interface Setting
USB Keyboard
Host Mode (Command Decoding +
Physical Serial Port)
Serial Port
Scanner is configured in serial port mode
Restore Factory Settings
Setting Barcode
Do not scan this barcode in USB mode
Serial Port (Default)
485 Mode
Device ID Setting
USB Upgrade
Weigan Mode (Self Induction + Weigan)
USB To Serial Port
Indicating light
Data cable interface