User Manual

65
26
1A
SUB
27
1B
ESC
28
1C
FS
29
1D
GS
30
1E
RS
31
1F
US
Some feature configuration instructions and examples
Example of custom prefix and suffix configuration
Configure the barcode pre/suffix by scan code. Each prefix or suffix character can be up to 10.(To ensure
that custom suffixes can be output, configure the scanner's custom pre/post suffix output option to be
turned on.)
Example 1.1: Add a custom prefix XYZ to all types of barcode.
Query the appendix barcode type ID table,the HEX value of all code systems is 99. Query the visible
character ASCII table,the HEX value corresponding to XYZ is 58, 59, 5A.
Scan configuration code, custom prefix,the barcode scanner will emit a "drip..drip.." two prompt，Then
scan the appendix data and edit the 9, 9, 5, 8, 5, 9, 5, A in the bar code, save, and complete the
configuration.
If you need to modify the scanned barcode before saving, you can also scan to cancel the previous data
or cancel the previous data to reconfigure.If you need to abandon this configuration in the middle, directly
scan to cancel the current settings.
Example 1.2：Add a custom prefix R to the QR code
Query the appendix barcode type ID table,the HEX value of all code systems is 51.Query the visible
character ASCII table,the HEX value corresponding to R is 58, 59, 5A.