Manualshelf

User Manual

ManualsBrandsNADAMOO ManualsBar Code ScannersBarcode Scanner Module EP2600, Embedded 1D 2D QR Auto-scan Barcord Reader CMOS Support Screen Scan USB (SDK & Serial Command Available for Development) Fixed Mount to Self-Service Equipment
11121314151617181920
Configuration Code Turn on（Default)
17
2.2.7 Time out setting
In manual key mode, it is allowed to select the automatic sleep function in idle time.
"Idle" means that there is no key and no communication for a certain period of time.
Automatic sleep is to enable the device to enter a state of low power consumption. When
there is trigger signal or upper computer communication, it will automatically recover from
sleep state to working state. The delay from sleep to work is less than 100 milliseconds
(MS).
Disable time out
Enable time out
The idle time setting range is 0 ^ 65535ms, and the default time is 500ms. Refer to
appendix: modification method of idle time condition for idle time setting method.
Change time out setting
2.2.8 Scan Mode
8data bits, 2stop bits, odd check bit
Manual scanning model